Product Description

 Centrifugal Air Compressor

 

Product Description

 

Oil-free Principle

Based on the working principle of centrifugal compressors, Geso’s entire

series of centrifugal compressors and blower air systems.
 

It is a completely independent working system from the oil system,Based

on the working principle of centrifugal compressors,Geso’s entire series

of centrifugal compressors and blower air systems fundamentally

ensuring that the compressed air is absolutely oil-free.

Safe and reliable

Fewer moving parts and low failure rate
 

The rotor has been strictly dynamically balanced to

ensure the lowest vibration
 

Efficient sealing ensures lower leakage
 

High efficiency and energy

Dynamics optimized design to ensure the most

efficient operation of working parts and systems
 

Advanced impeller design, optimal unit efficiency

and wider control range
 

20 years long life

CHINAMFG product design is scientific and rigorous,

and after strict material selection, the design life

of the whole machine exceeds 20 years

 

Air System

The filtered gas enters the inlet of the unit and is accelerated by the high-speed rotating impeller, which increases the gas flow rate. The high-flow gas passes through the diffuser, converts its speed energy into pressure and temperature,and enters the gas cooler to release excess heat. This process is repeated at each successive stage until the required operating pressure and temperature are reached.

 

 

 Intake Xihu (West Lake) Dis. VaneIntake

The electric intake guide vane valve caelyn accurat control the opening of the

guide vane, thereby accurately adjusting the inlet air volume.

 

 

 

 

 

Pipe

The grooved pipe fitting method does not damage the inner wall of pipeline and the original characteristics of the pipeline are not affected                                                           

 

It has the character istics of flexibility, which makes the pipeline resistant to earthquakes,telescopicity and expansion, high stability and easy maintenance.

 

 

The pipelines are designed for large flow, and the transition between pipelines is smooth to minimize the pressure drop.

 

 

 

 

High Efficiency Cooler

Large flow design, surface coating treatment. It adopts the design of water leakage in the pipe and air leakage in the shell, which is easy to clean,corrosion-resistant and not easy to scale.

 

The cooler core is removable for easy maintenance and cleaning

 

Excellent cooling effect, adaptable to various complex working conditions

 

.

 

Transmission system and sealing

The unit adopts a horizontally split design, which is convenient for disassembly and assembly and subsequent maintenance.

 

The gearbox is made of high-performance ductile iron material and is integrally cast with anti-rust and anti-corrosion treatment on the surface to ensure a long service life.

 

Lubrication System

A complete lubrication system is a strong guarantee for the stability of the centrifugal compressor.
 

The fuel tank, fuel pump, accessories and connecting elbows are carefully designed and selected from materials.
 

Reliable, clean, energy-saving, and redundantly protected lubricating oil system, every detail shows quality

Lubricating Oil Pipeline Design

All are made of sanitary grade SUS304 stainless steel tubes and are designed in one-step molding without welding points.

 

No fluid flow dead center.

 

No processing residues in the tube
 

Ensure there are no leaks and minimal pressure drop when the machine is running.

 

Oil Mist Extraction System

Effectively prevent lubricating oil from oxidizing and extend lubricating oil service life .

 

Electrically controlled, low-noise blower eliminates in-duct processing residue on instrument air supply.

 

Ensure there are no leaks and minimal pressure drop when the machine is running.

 

 

Tank

High-strength carbon steel, internal anti-corrosion coating treatment.

 

High-strength,large-capacity design

 

Main Oil Pump

The main oil pump adopts an over-flow design to ensure that the unit can stop

safely in the event of a sudden power outage, ensuring that the machine has no

leakage points and minimal pressure drop during operation.

Auxiliary oil pump 

Electrically driven, interlocked with the unit’s start switch to ensure that the unit is fully lubricated before starting up and when shutting down.

 

 

 

 

 

 

Stand-alone Plc Controlsystem

Overall Control Cabinet

The control interface is clear and easy to understand, and the touch screen operation is simple and fast.
LCD Screen

Display various parameters and real-time data monitoring to ensure reliable operation of the equipment.
Automatic Mode

When the gas volume fluctuates greatly, the gas volume is adjusted by the IGV, when the gas volume continues to decrease, load/unload control is used. Really

achieve on-demand energy consumption.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multi Machine Intelligent Centralized Control System

Online control:

Multiple compressors can be jointly controlled to

realize a true compressed air network and improve

gas quality and production efficiency.

Energy efficiency optimization:

Customers can choose analysis software to conduct

operation monitoring, fault warning, and energy

efficiency analysis for each air compressor.

Modular Design

CHINAMFG centrifugal compressors are provided with standard integral skid mounting.
 

For special installation occasions, we provide a unique modular design, where the main body, cooler, fuel

tank, motor, and control cabinet are designed as separate modules. It has the characteristics of convenient

transportation, installation and maintenance.

                                  Overall Skid Installation

 

Separate Assembly

Split assembly is mainly suitable for small spaces and other special installation occasions.
 

Installation issues are taken into consideration for each module in the early stages of design,and a modular design is adopted to make the assembly quality more stable.

 

At the customer’s site, the machine can be assembled in a very short time.
 

Each module can be transported and installed separately, which greatly reduces the volume and weight of transportation and installation, and reduces transportation costs.

 

Product Parameters

 

 

 

Certifications

Packaging & Shipping

 

Company Profile

Geso is a global aerodynamic systems group of companies, wholly owned by BAE CHINAMFG SYSTEMS, headquartered in London, United Kingdom, and a leader in the European gases sector.
BAE Systems, the parent company of CHINAMFG Group, was founded in 1871 and is committed to the research and development and production of industrial gases. In 2002, BAE Systems set up a representative office in China, importing products from the United Kingdom to China and deploying after-sales service offices in China, and in 2018 BAE Systems established a wholly-owned company “ZheJiang Geso systems Industrial PLC and invested 11 million U.S. dollars to build an intelligent manufacturing center; dedicated to research and development, production and market development. Our products include energy-saving screw air compressors, nitrogen/oxygen generators, dry oil-free air compressors, water-lubricated oil-free air compressors, mobile air compressors, process gas compressors, medium and high-pressure screw air compressors, centrifugal air compressors, etc., which are widely utilized in various production and industrial fields, and we have set up the “ZheJiang Geso systems Industrial PLC”, “ZheJiang Geso Equipment Co.,Ltd.”, “ZheJiang Geso Energy Equipment Co.,Ltd.” 3 companies, more than 30 branches and offices throughout the country, more than 200 distributors, for all walks of life to provide high-quality intelligent energy-saving air compressor system solutions.
Geso Group inherits the advanced technology and production management mode of British BAE Systems, combined with the Chinese market demand, in order to ensure the production safety of the user, strictly follow the Group’s product development process, each new product after 40 test items and 3000 hours of durability testing, to protect the quality of the product from the source; CHINAMFG compressor adopts the high quality screw compression element developed by BAE Systems, The material is used in the construction of large ships and nuclear submarines, which ensures the service life of the air compressor. The structure of the air compressor has been developed by the design team of BAE Group headquarters, which ensures the product quality and energy-saving effect. IE5 energy-saving motors, ABB electronic control system, and three-stage frequency conversion energy-saving system are selected to reduce energy consumption and carbon dioxide emissions, which saves costs for customers and realizes small investment and big power. Meanwhile, by optimizing the design and reducing the screw compression element’s speed, our air compressors have excellent silent performance. Independent research and development of intelligent Internet of Things (IoT) technology realizes the automatic and precise supply of air compressor and nitrogen generator equipment with the actual demand amount of the user to meet the automation experience of unattended, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking and evaluation feedback. Convenient interconnected management with air compressors is realized through computers, cell phones and iPads. In addition, the reasonable construction and excellent workmanship of Geso reduces unnecessary maintenance work in normal times, making maintenance more convenient and efficient.
Through years of high-speed development, Geso Group has service outlets in more than 2 hundred cities across the country, 24-hour service hotline response and Internet warranty service. Thirteen direct spare parts warehouses to provide customers with repair services in a more rapid and timely manner.
After-sales service is not only limited to the product itself, but also includes a series of complete systematic services such as compressed air system testing and optimization, intelligent air supply control for air compressors, waste heat recovery, variable frequency piping, piping, cables, and construction turnkey projects. The service engineers not only undergo strict training and assessment, but also equipped with professional testing and maintenance tools to provide customers with quality service experience and escort production.
We are committed to a lifetime free of labor charges to reduce the user’s cost of use and avoid the phenomenon of indiscriminate charges. Based on our service concept to provide customers with free training services, regular testing of the user’s energy efficiency report data and develop energy-saving programs to ensure user satisfaction and energy-saving effect. For 3 consecutive years, we have been selected as 1 of the top 10 brands by third-party organizations such as China Brand Network.
As a global aerodynamic systems group of companies, we carry the mission of innovation, quality and service. Whether it is energy saving and environmental protection, quiet performance or intelligent, always adhere to the praise of the customer experience as the center of the hard workers, Geso, to create a global CHINAMFG brand of fluid machinery, and continue to become a high-end energy-saving products industry leader.
Timeline of Geso history

BAE MARCONI ELETRONIC SYSTEMS was founded in 1871 in London, England. In the same year, we developed and produced the first reciprocating compressor and devoted ourselves to the development and production of industrial gases.
In 1910, the company’s main business expanded to multiple areas: air compressors, nitrogen/oxygen air separation equipment, integrated electronic products, the company’s core product development of single-cylinder reciprocating air compressor technology and mass production.
In 1999, the company was founded as “BAE CHINAMFG SYSTEMS LTD” and developed the first twin-screw air compressor and established the brand “GESO SYSTEMS”.
In 2000, the company developed and produced the first dry-type oil-free screw machine into the market, and it is widely used in the European medical, food and electronic industries.
In 2002, BAE Group set up a representative office in China, products from the United Kingdom after the production of original imported equipment for the Chinese market expansion, and successfully entered the Chinese aerospace and high-precision machining field market.
In 2006, a total of 26 after-sales service operation outlets were built in each provincial capital city in China, fully deploying the after-sales service system to quickly respond to and safeguard users’ experience and production safety.
In 2016, a warehousing and logistics center was established in ZheJiang , China, to ensure the timely supply of complete machines and spare parts for the Chinese market.
In 2018, the British BAE Group registered in China to establish “ZheJiang Geso systems Industrial PLC” and set up a compressor assembly and production plant in ZheJiang , China at the same time, with a registered capital of 11 million U.S. dollars.
In 2571, ZheJiang Geso systems Industrial PLC. invested and established “ZheJiang Geso Equipment Co., Ltd.” and set up a nitrogen/oxygen air separation equipment sales company in HangZhou, and in the same year, set up the second phase of the project of 300 sets of nitrogen/oxygen equipments in ZheJiang factory. The R&D and production of nitrogen/oxygen control equipment was added.
In 2571, we invested in the establishment of “ZheJiang Geso Energy Equipment Co., Ltd.” and registered some of the former offices in provincial capitals as branches to complete the separation of production and sales, and to realize the high efficiency and convenience of national market development and service.
 

Our Advantages

Core components: the screw compression element adopts the British R & D BAES series screw compression element , the material is used in the United Kingdom in the construction of aircraft carriers, nuclear submarine construction , fine material to ensure that the service life of the air compressor, decades still as new; high-quality S K F bearings life as high as 100,000 (100 thousand) hours; the use of imported ASCO valves and CHINAMFG solenoid valves ABB electrical components, to ensure that the system is safe and stable operation for long periods of time.
Science and technology research and development: the structure of the air compressor is developed by the design team at the headquarters of BAE Group in the UK, so that the quality and energy saving of the air compressor is satisfactory to the users. The R&D personnel of the British headquarters total 220 people, dedicated to energy-saving system research and development funds of 1.5 million U.S. dollars per year, to ensure that the equipment of energy-saving products of superiority; air separation equipment selection of the German CHINAMFG controller and touch screen, flow, purity, pressure and dew point intuitively presented in the touch screen, the process and the action screen vivid image, at a glance, leaving the DCS remote ports, the data can be transmitted to a centralized control room and cell phone terminal. The data can be transmitted to the central control room and mobile phone;
Energy saving and environmental protection: IE5 energy-saving motors, ABB electronic control system, three-level frequency conversion (motor, fan, oil pump) energy-saving system, in the selection of materials and process design, the selection of special stainless steel management connection, the design of which ensures that the internal leakage of air compressor air volume ≤ 0.571m³/min, the use of imported fibers oil and gas separation technology and oil and gas barrel precision design, the reasonable location of the pipeline with the air compressor The internal pressure difference ≤ 0.003MPa, thus reducing energy consumption, reducing carbon dioxide emissions, reducing the use of cost, small investment, big power;
Strong silent performance: through the optimization of air compressor design and air compression element performance enhancement, reduce the air compression element speed, not only to extend the service life of the air compressor, and at the same time significantly reduce the noise generated by the equipment, CHINAMFG polyester fiber polymer material developed from the sound insulation cotton and customized rubber shock absorbers, the silent equipment to bring the protection of the equipment, equipment operators and production personnel to bring the health and safety of the guarantee;
High degree of automation: The company has independently developed intelligent Internet of Things technology combined with air compressor and nitrogen generator equipment, which collects data to the cloud data processor through 2G/4G/NB-loTLoRa/Ethernet, automatically matches the accurate supply of gas with the user’s actual demand, and realizes the automation experience of unmanned, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking, and evaluation feedback. It realizes unattended remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless connection, evaluation and feedback.
Convenient maintenance: reasonable construction, fine workmanship, reduce the usual unnecessary maintenance, cleaning and maintenance is more convenient, in the special design process, so that the efficiency of the maintenance staff to improve, to protect the user to use the timeliness;
One-stop service: complete product range, one-stop service for air system and gas engineering.
Qualification and certification: Geso has obtained ISO14001 environmental management system, ISO45001 health management system and ISO9001 quality management system certification, certificate 0 oil-free certification, CE EU certification, air compressor energy-efficiency certification, 3A integrity system certification and other certificates from authoritative certification organizations, which can fully guarantee the safety of users, and has been highly recognized by the market and users. We are highly recognized by the market and users.

 

Product Manufacturing and Acceptance Standards
The design, manufacture, installation and acceptance of screw air compressor are all based on the relevant Chinese national standards (GB) and in accordance with the requirements of the following relevant standards, norms and regulations (but not limited to), with full consideration of the impact of local environmental conditions and conditions of use.

No.	Standard	Item
1	GB150-1998	Steel Pressure Vessels
2	GB151-1998	Steel Shell and Tube Heat Exchangers
3	JB/T4709	Steel Pressure Vessel Welding Regulations
4	GB/T13278	Technical conditions for general screw air compressors
5	GBJ78	Noise hygiene standards for industrial enterprises
6	GB3853	Test Methods for Pneumatic Compressor Performance for General Use
7	GB4980	Determination of sound power level of volumetric compressor noise – Engineering method
8	JB8-82	Product Labeling
9	ASME-PTC-9-1970 (American Society of Mechanical Engineers standards)	Air compressor performance test standards
10	VDI-2056 (Standard of the Association of German Engineers)	Operating Vibration Test Standards
11	ISO-2151 (International Organization for Standardization standard)	Operating Noise Test Standards
12	GBJ29-90	Compressed air station design specification
13	GB3323-87	Radiographic and quality analysis of steel melting welded joints
14	GB4720	Electrical Control Equipment Part I Low Voltage Electrical Control Equipment
15	JB4127	Mechanical Seal Technical Condition 3 Main Technical Data

 

After Sales Service

1 Technical services: regardless of pre-sale, sale, after-sale, as long as the user side demand equipment technical help and consulting, the company will be accurate within 24 hours to provide relevant technical information free of charge.
2 After the successful on-site start-up and commissioning acceptance, our after-sales engineers are responsible for the user’s operators to carry out routine and emergency operation training.
3 Under normal operation, maintenance and repair of the equipment, the whole unit is guaranteed for 1 year, and the air compression element is guaranteed for 5 years. During the warranty period, the non-wearable parts in the unit, damage or failure under normal use, are gratuitous compensation, free of charge replacement.
4 Regardless of the warranty period inside and outside, my company will be on schedule to the factory inspection of gas purity, flow, pressure, voltage, current, screws tightness, etc. are to do a comprehensive test in a timely manner to understand the dynamics of the unit’s operation, such as receiving the notification of the user’s equipment failure, on-call.
5 In normal operation, my company will be monthly, quarterly and regularly arranged for the user to telephone or after-sales engineers to the scene to do the equipment operation visit work, timely understanding of the unit operation dynamics, received the user equipment failure notification, the office to immediately give a telephone reply, within 1 hour to the scene to deal with. Office in the field can not deal with the situation, the ZheJiang head office will be sent directly to the scene within 24 hours to deal with after-sales engineers. In order to ensure the long-term stability of the equipment work.
6 Spare parts service: In case of damage to tubing parts, Geso will solve the problem first, then determine the responsibility, and then talk about the price, and then replace the parts after the problem is solved.
7 Free labor fee, Geso company lifetime free labor fee, reduce the user cost of use, to avoid the phenomenon of indiscriminate charging.
8 Service quality assurance: the company’s after-sales service personnel in the headquarters of the Geso after systematic training and strict examination to obtain technical certificates to ensure that each after-sales service personnel’s ability to deal with technology.
9 Service outlets: the company has after-sales service outlets in most areas of China, to ensure that the user’s problems are solved in a short period of time and there is a storage center in the after-sales service outlets to ensure the timely supply of spare parts.
10 Free training service: Geso company through the site operation training to ensure the correct use of the user operator, Geso company will be adjusted for the user personnel, re-training on-site personnel operation, each training are not charged any fees.
11 Energy-saving services: If you buy our product line, our company will regularly test the user energy efficiency report data, energy-saving data distraction and develop programs, timely energy-saving adjustments to the equipment, to protect the user’s energy savings and cost reductions.
 

Customer Cases

No.	Customer‘s company name	Quantities
1	HangZhou Risen Electromechanical Co.,Ltd.	5 units
2	HangZhou Nuoyi Laser Equipment Co.,Ltd.	3 units
3	ZHangZhoug Luneng Renewable Resources Co.,Ltd.	4 units
4	HangZhou Renliang Medical Machinery Equipment Co.,Ltd.	2 units
5	ZheJiang CHINAMFG Limited Liability Company	6 units
6	HangZhou CHINAMFG Machinery Co.,Ltd.	1 unit
7	HangZhou CHINAMFG Trading Co.,Ltd.	1 unit
8	ZheJiang Veneta Clothing Co.,Ltd.	1 unit
9	ZheJiang CHINAMFG Intelligent Equipment Co.,Ltd.	7 units
10	HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.	6 units
11	ZheJiang Zhongfa Environmental Protection Co.,Ltd.	6 units
12	ZheJiang CSIC Lingang Shipbuilding Equipment Co.,Ltd.	2 units
13	ZheJiang Wangxin Soybean Products Equipment Co.,Ltd.	2 units
14	ZheJiang Zhi Fu Pharmaceutical Technology Partnership (Limited Partnership)	2 units
15	Hongli Shoe Material	5 units
16	HangZhou HangZhoun Metal Products Co.,Ltd.	6 units
17	ZheJiang CHINAMFG Logistics Machine Co.,Ltd.	3 units
18	ZheJiang Qiangxiong Construction Group Co.,Ltd.	5 units
19	HangZhou CHINAMFG Logistics Machine Co.,Ltd.	4 units
20	Hongzheng Electric Co.,Ltd.	3 units
21	HangZhou Hengjun Technology Co.,Ltd.	3 units
22	ZheJiang Dajing Biological Engineering Co.,Ltd.	5 units
23	HangZhou Yi Ai Electronic Technology Co.,Ltd.	7 units
24	ZheJiang Shengwei Bio-technology Co.,Ltd.	2 units
25	ZheJiang Jiuding New Material Co.,Ltd.	4 units
26	HangZhou Xitu Environmental Protection Technology Co.,Ltd.	2 units
27	ZheJiang Taiqing Mechanical & Electrical Co.,Ltd.	3 units
28	HangZhou Guitai Pipe Industry Co.,Ltd.	6 units
30	HangZhou Przeszler Advanced Molding Technology Co.,Ltd.	4 units
31	HangZhou CHINAMFG Thermal Power Co.,Ltd.	1 unit
32	HangZhou Tellier Environmental Protection Group Co.,Ltd.	1 unit
33	ZheJiang CHINAMFG Electric Power Design & Consulting Co.,Ltd.	3 units
34	HangZhou Hongfengde Auto Parts Co.,Ltd.	2 units
35	ZheJiang ZHangZhoug Mining Group Company Limited Danying Coal Mine, Gubao Township, Xiwen County	6 units
36	ZheJiang Zhongmin Da Zheng Surface Engineering Technology Co.,Ltd.	4 units
37	NDT Group YuHangZhou Environmental Protection Equipment Manufacturing Co.,Ltd.	4 units
38	ZheJiang Vimet Decoration Material Technology Co.,Ltd.	3 units
39	Kangyue Biotechnology Co.,Ltd.	2 units
40	HangZhou Kangcai Medical Supplies Co.,Ltd.	5 units
41	Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd.	3 units
42	HangZhou CHINAMFG Packaging Industry Co.,Ltd.	2 units
43	HangZhou Tianlai Environmental Protection Equipment Co.,Ltd.	6 units
44	HangZhou Yongzhengxin Hardware Machinery Factory	3 units
45	HangZhou Industrial Park Shunhao Machinery Factory	2 units
46	HangZhou Chemical Machinery Manufacturing Co.,Ltd.	2 units
47	HangZhou Dehai Environmental Protection Technology Development Co.,Ltd.	3 units
48	ZheJiang Maosheng Environment Co.,Ltd.	1 unit
49	Air Force Engineering University Aviation Engineer Officer School	1 unit
50	ZheJiang Tiantuo Equipment Manufacturing Co.,Ltd.	1 unit
51	HangZhou Chemical Machinery Manufacturing Co.,Ltd.	2 units
52	HangZhou HangZhou Clothing Co.,Ltd.	2 units
53	HangZhou CHINAMFG Glass Co.,Ltd.	2 units
54	HangZhou City HangZhou Xihu (West Lake) Dis.ent City Development and Management Co.,Ltd.	2 units
55	HangZhou Sunshine CHINAMFG Chemical Engineering Co.,Ltd.	3 units
56	HangZhou CHINAMFG Electric Appliance Manufacturing Co.,Ltd.	4 units
57	HangZhou Xihu (West Lake) Dis. Electric Co.,Ltd.	3 units
58	HangZhou Saida Construction Machinery Co.,Ltd.	2 units
59	HangZhou Tellier Environmental Protection Co.,Ltd.	1 unit
60	ZheJiang Lvjing Environmental Protection Technology Engineering Co.,Ltd.	1 unit
61	China Construction Third Bureau Second Construction Engineering Co.,Ltd.	1 unit
62	HangZhou Przeszler Advanced Molding Technology Co.,Ltd.	1 unit
63	HangZhou Bochuang Environmental Protection Technology Co.,Ltd.	2 units
64	HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd.	1 unit
65	ZheJiang Renze Technology Co.,Ltd.	1 unit
66	Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd.	1 unit
67	ZheJiang Haibelian Kaihe Roofing Engineering Co.,Ltd.	1 unit
68	ZheJiang Xihu (West Lake) Dis. Technology Co.,Ltd.	2 units
69	HangZhou Huagong CHINAMFG Electronics Co.,Ltd.	1 unit
70	HangZhou Oriental Environmental Engineering Research Institute Co.,Ltd.	2 units
71	HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd.	2 units
72	HangZhou Bochuang Environmental Protection Technology Co.,Ltd.	1 unit
73	ZheJiang Prime New Energy Technology Co.,Ltd.	3 units
74	Daiko International Trading (ZheJiang ) Co.,Ltd.	1 unit
75	ZheJiang Qiangxiong Construction Group Co.,Ltd.	3 units
76	HangZhou Kelen Commercial Equipment Co.,Ltd.	2 units
77	ZheJiang Bigo Electromechanical Equipment Co.,Ltd.	2 units
78	ZHangZhoug Qier Electromechanical Technology Co.,Ltd.	4 units
79	HangZhou Xihu (West Lake) Dis.deli Biotechnology Co.,Ltd.	3 units
80	ZheJiang Normal University	1 unit
81	Jumin Biotechnology Co.,Ltd.	3 units
82	HangZhou Sanfengqiao Foodstuffs Co.,Ltd.	3 units
83	HangZhou Jinji Strong Magnetic Co.,Ltd.	1 unit
84	ZheZheJiang di Industrial Co.,Ltd.	1 unit
85	Zhongtian Chaolong Technology Co.,Ltd.	3 units
86	ZheJiang WHangZhou Pharmaceutical Co.,Ltd.	1 unit
87	ZheJiang Hadajiang Liquor Liability Company	1 unit
88	Jacoby Environmental Materials Technology (ZheJiang ) Co.,Ltd.	5 units
89	HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.	1 unit
90	ZHangZhoug Province Mechanical and Electrical Design and Research Institute Co.,Ltd.	1 unit
91	HangZhou CHangZhou District Hengwei Machinery Trading Co.,Ltd.	1 unit
92	ZheJiang Jiao Tong University	2 units
93	Chang Xihu (West Lake) Dis. (Individual)	2 units
94	HangZhou Xihu (West Lake) Dis.wang Paper Co.,Ltd.	3 units
95	HangZhou CHINAMFG Mould Technology Co.,Ltd.	2 units
96	HangZhou Institute of Technology	1 unit

FAQ 

 

[Q]: Are you a manufacturer or a trade company?
A : We are a factory, and we have our own factory in ZheJiang , we market our own products.

 

 

[Q]: What is your lead time?
A :Usually we will spend about 30 working days to make it.

 

 

[Q]: What is the shipping port?
A :ZheJiang ,HangZhou or HangZhou

 

[Q]: How can I get your quotation?
A : We will provide the quotation according to your request as soon as possible.
Before quotation, We would like to know:
1 you are end user or mid-buyer(agent, distributor,Supporting Enterprise or designing institute etc.)
2 if you are end user, what industry are you in?
3 have you bought such equipment before, what brand?
4Direction of use (where the compressor is used, what equipment it supplies)
5 What delivery volume, delivery pressure, whether frequency conversion, whether with after-treatment equipment do you want?
6 Have you ever heard about our brand:GESO

 

[Q]: What is your Quality assurance system?
A : ZheJiang Geso systems Industrial PLC is a wholly foreign-owned enterprise, and is also the authorized base for the production and assembly of screw compressors by BAE Systems in the UK. The company has passed ISO9001:2015 quality system certification of enterprises, ISO45001:2018 health and safety management system and ISO14001:2015 environmental management system and many other certifications. The company, from the chairman to every employee, has been trained in the world’s advanced quality system in order to obtain the induction certificate. Every year, we need to be reviewed and recognized by the certification body, and strictly in accordance with the certification system for each link in the strict day-to-day management of its products, procurement, inspection, testing, installation and commissioning of the whole machine are strictly in accordance with the ISO9001 program, to ensure that each compressor embodies the factory should be the quality and reliability of the company’s products with a high starting point, high-speed start, with a high reputation and high quality! The company’s products have a high starting point and high speed to start, with high reputation and high quality to win the trust of users from all walks of life. The company’s products to implement the 3 bags, 3 bags for 1 year. The company shall bear the replacement cost of parts, repair cost and transportation and miscellaneous cost of equipment round trip (except perishable parts such as 3 filters, lubricating oil and external auto-drainer) during the warranty period of the supplied equipments. If the rework or equipment damage is caused by our company’s drawings, data, technical documents errors or technical service personnel on-site guidance, our company is immediately responsible for free repair or replacement.

 

[Q]: What does your brand “GESO” mean?
A : Gas: Description of Geso products characterized as equipment for applications in the field of all types of gas processes.

Efficient: Design, innovation and development of a full range of products for the purpose of energy saving.

Stability: to ensure the user’s production safety and stability as a prerequisite requirement

OPTIMUM : to build a world-renowned brand of fluid machinery, and continue to become the industry leader in high-end energy-saving products.

Systems : the business philosophy centered on the praise of service customer experience. CHINAMFG provides compressors, after-treatment, pressure vessels, installation piping, intelligent cloud, air separation equipment and other series of products, providing users with one-stop product services; from pre-sales program design, installation of equipment during the sale, after-sales maintenance to create a full-system operation and service team.

 

Air Compressor Frequently Asked Questions

The following items are some of the most frequently asked air compressor questions and answers, courtesy of CHINAMFG systems.

How Does an Air Compressor Work?

An air compressor works by using electric power to create pressurized air that can then be released and converted to usable power for use in a number of applications, depending on your specific needs. It performs this by compressing air within a chamber by means of a piston, rotary vane or screw or scroll element and then releasing this pressurized air into your downstream receivers and distribution piping system.

How Do You Use an Air Compressor?

Follow these simple steps to use your air compressor safely and efficiently:

1. Check the oil level: For oil-filled compressors, check that the oil level reaches about ⅔ of the way up the dipstick.

2. Prepare the compressor: Attach hoses, plug into a grounded outlet, check the drain valve and flip the power switch.

3. Adjust the pressure regulator: Set the pressure to match the level your air tool requires.

4. Operate your device: The tank will refill as you use your tool.

5. Complete proper cleanup: Turn off the compressor to drain the pressure and open the air tank drain valve to clear out condensation.

What Does an Air Compressor Do?

Air compressors provide compressed air for applications such as filling gas cylinders with high-pressure clean air, providing pressurized clean air for operating pneumatic CHINAMFG systems or tools, filling tires and a wide variety of other applications across industries like automotive, medical, food and beverage, petroleum, pharmaceutical and more.

What Do You Use an Air Compressor For?

Air compressors can be used for many personal and professional applications. A few at-home uses include:

· Blowing up balloons

· Pumping up tires for bikes and vehicles

· Inflating pool accessories and air mattresses

· Refilling deflated sports equipment

· Pressure washing

· Powering tools for sanding, polishing and other types of crafting

· Painting with an airbrush or sprayer

Many businesses rely on air compressors to accomplish work safely and efficiently. Some industries that use compressors include:

· Agriculture

· Manufacturing

· Automobiles

· Pharmaceutical

· Food and beverage

· Dental and medical

· Construction

How Much Is an Air Compressor?

Air compressors can cost anywhere from $125 to $2,000. The price of an air compressor depends on many factors, including:

· PSI and CFM: Pounds per square inch (PSI) measures how much force an air compressor has, while cubic feet per minute (CFM) measures the flow.

· Duty cycle: This percentage indicates how long the compressor can provide air during a cycle.

· Life span: Compressors can last between 15,000 to 60,000 hours, depending on their use and size.

The type of compressor you need and how much you will pay for it will depend on your industry or personal needs.

How Often Do I Need to Change the Oil in My Air Compressor?

If you have a lubricated reciprocating, rotary screw or rotary vane air compressor, you’ll need to change the oil from time to time to keep it working properly. The recommended schedule is generally 3 months, subject to the manufacturer’s recommendation. For a rotary screw compressor, you’ll want to change the oil every 4,000 to 8,000 hours depending on the type of oil employed.

Do Air Compressors Run Out of Air?

If you run a regular duty cycle with an appropriate load, you will always have the air you need. As you use your tool, the pressure switch will detect the drop in pressure and start the compressor. Once the tank has refilled to the preselected pressure point, the compressor will shut off. The pressure switch will manage this function throughout the time you’re using an air tool.

If you attach a tool with an air requirement that is too great for the tank, you run the risk of emptying your air tank and having to wait for the compressor to refill it to a usable level. Always check your air compressor’s capabilities and your tool’s required pressure before connecting them.

Do I Need an Air Dryer in Addition to My Air Compressor?

It’s often a good value for you to add an air dryer to your air compressor system, as your air compressor can put a great deal of water into the compressed air system. Your air dryer could potentially remove gallons of water each day.

How Do I Control Contaminants in My Compressed Air System?

It’s important to have an effective air filtration system to keep your compressed air clean. CHINAMFG systems can provide you with all the air filters you need to help keep your compressed air clean.

How Often Do I Need to Replace My Air Intake Filter?

Air compressors with air intake filters need to be cleaned weekly. If your filter has built up so much debris that you can’t get it completely clean, or the filter is torn, you should replace it right away.

How Do I Control the Dew Point of My Compressed Air System?

If you’re worried about hitting the dew point, a quality air dryer should be the solution.

What Is the Correct Voltage for My Air Compressor?

Usually, 110 volts is sufficient for a small compressor. Larger compressors may take as much as 460 volts.

How Do I Drain the Water From My Tank?

You can drain your tank water manually or purchase an automatic drain valve to remove the water automatically. If water is becoming a big problem, consider investing in a more appropriately-sized air dryer.

What Is the Right Type of Hose for My Air Compressor?

It depends on the air compressor, but typically, they take a 1/4″ or 3/8″ hose. Your Geso systems professional can help you match the right hose to your compressor.

Do I Need a Reciprocating Compressor or a Rotary Screw Compressor?

For most applications, a reciprocating compressor is sufficient. If you need a compressor that runs continuously day and night, you need a rotary screw compressor.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Mute:	Mute
Impeller:	Closed
Cooling System:	Water Cooling
Lubrication Style:	Oil-Free
Material:	Cast Iron
Type:	Multiaxial Type

Customization:	Available |