Tag Archives: bar compressor

China Custom Stationary Energy Save 8 Bar 55kw VSD Screw Air Compressor for Paint Spray Guns air compressor oil

Product Description

Stationary Energy Save 8 Bar 55kw Vsd Screw Air Compressor for Paint Spray Guns

Technical Parameters Of PM Variable speed screw air compressor:

Model	WZS-75AVF
Air Flow/Working pressure	9.7 m3/min @ 8bar
Air Flow/Working pressure	8.6 m3/min @ 10bar
Cooling type of COMPRESSOR	Air cooling
Cooling type of MOTOR	Oil cooling
Driven method	Integrated connection
Start way	Soft VSD Start
VSD inverter	INOVANCE / HOLIP / VEICHI
Exhaust Temp.	< ambient temp. +8 degrees
Oil content	<2ppm
Noise	65±2 dB(A)
Power	380VAC/3ph/0~200Hz
Motor power	55kw/75hp
Dimension	170012701500mm
Weight	1200kg

Model	Power (KW)	MAX Pressure (Bar)	Air flow (m³/min)	Noise dB(A)	Compression stages	Outlet diameter (Inch)	Dimension (mm)			Weight (kg)
							L	W	H
WZS-10AVF	7.5	8.5	1.0	60±2	Single	3/4″	1000	600	1000	280
		10.5	0.8
WZS-15AVF	11	8.5	1.8	62±2	Single	1″	1300	860	1030	380
		10.5	1.6
WZS-20AVF	15	8.5	2.2	63±2	Single	1″	1300	860	1030	480
		10.5	1.8
WZS-30AVF	22	8.5	3.8	66±2	Single	1¼”	1380	850	1150	620
		10.5	3.0
WZS-40AVF	30	8.5	5.0	68±2	Single	1¼”	1380	850	1150	680
		10.5	4.4
WZS-50AVF	37	8.5	6.2	68±2	Single	1½”	1600	1000	1370	850
		10.5	5.4
WZS-60AVF	45	8.5	8.0	68±2	Single	1½”	1600	1000	1450	880
		10.5	6.8
WZS-75AVF	55	8.5	9.7	70±2	Single	2″	1700	1270	1500	1350
		10.5	8.5
WZS-100AVF	75	8.5	13.2	70±2	Single	2″	2150	1300	1700	1950
		10.5	11.6

Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).

High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault.
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.

Q: If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Video Technical Support
Warranty:	1 Year
Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China Custom Stationary Energy Save 8 Bar 55kw VSD Screw Air Compressor for Paint Spray Guns air compressor oil
editor by CX 2024-05-17

China best Industrial Stationary Similar CHINAMFG Rand Clean Class 0 Silent 7 8 10 Bar Medical Oil Free Electric Direct Driven AC Inverter Rotary Screw Air Compressor supplier

Product Description

Product description
High -efficiency design and control, Our vortex compressor has a larger flow per kilowatt, and the single-stage compression pressure is as high as 10 barg. We pass
the following design functions to achieve such high efficiency:
Start/stop control to reduce empty load energy waste;
Dual air inlet compressor design achieves stable and efficient compression;
Reduce the overall weight of the product of the aluminum shell.

Product Feature

Modular design

Multi -road design can improve efficiency under low load conditions, which means that the number of work compressors can be accurately controlled to match the needs.

Cooling running

Use large fans to ensure low temperature operation and extend the life of the component

Microorganizer control

Manage the exhaust pressure to meet your air requirements, while measuring key operating parameters to reduce accidents.

The exhaust temperature is lower

The lower CTD value rear cooler can achieve lower exhaust temperatures, reduce the post-processing intake temperature after reducing, and reduce the post-processing investment cost after selecting a small one.

Specification

Model	Max.pressure barg	Rated powerkW	Air flow m³/min	Connection size BSPT	Dimensions (LxWxH)mm	Weight kg	Noise level dB(A)
W2i-A8	8	2.2	0 .24	1/2″	830×740×910	204	58
W2i-A10	10	2.2	0.21	1/2″		204	58
W4i-A8	8	3.7	0.40	1/2″		231	58
W5i-A8	8	5.5	0.60	1/2″		240	59
W5i-A70	10	5.5	0.53	1/2″		240	59
W7i-A8	8	7.7	0.84	1″	1445×800×1000	438	62
W7i-A10	10	7.7	0.74	1″		438	62
W11i-A8	8	11	1.20	1″		495	64
W11i-A10	10	11	1.06	1″		495	64
W17i-A8	8	16.5	1.89	R1	1280×770×1480	515	61
W17i-A10	10	16.5	1.5	R1	1280×770×1480	515	61
W22i-A8	8	22	2.52	R1	1330×880×1900	720	61
W22i-A70	10	22	2.0	R1	1330×880×1900	720	61
W33i-A8	8	33	3.78	R1.5	1360×1030×1670	1000	63
W33i-A10	10	33	3.0	R1.5	1360×1030×1670	1000	63

FAQ

Q1: What’s your delivery time?
A: 15 days to produce, within 3 days if in stock.

Q2: What’s methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.

Q3: What about the shipments and package?
A: 40′ container for 2 sets, 20′ container for 1 set,
Machine in nude packing, spare parts in standard export wooden box.

Q4: Have you got any certificate?
A:We have got ISO,CE certificate.

Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.

Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is 1 year for the machine.

Q7: Can I trust your company ?
A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online
Lubrication Style:	Oil-free
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for cleaning and blowing dust?

Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

1. Cleaning Machinery and Equipment:

Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

2. Dusting Surfaces:

Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

3. Cleaning HVAC Systems:

Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

4. Blowing Dust in Workshops:

In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

5. Cleaning Electronics and Computer Equipment:

Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

6. Industrial Cleaning Applications:

Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China best Industrial Stationary Similar CHINAMFG Rand Clean Class 0 Silent 7 8 10 Bar Medical Oil Free Electric Direct Driven AC Inverter Rotary Screw Air Compressor supplier
editor by CX 2024-05-15

China manufacturer 12 Bar Diesel Portable Screw Air Compressor Capacity 10m3/Min 353 Cfm air compressor for car

Product Description

Product
The air compressor is equipped with a separate 2-stage air filtration system to protect all components from the harsh conditions on the construction site.

Features
National III diesel engine emission standards.
Reliable and durable.
Superior performance.
Atlas Copco’s patented screw rotor design ensures low energy consumption and high performance.Suitable for harsh working conditions
High-performance chassis design.
Enhance your engine performance.
Using low quality oil may damage your engine. Our heavy-duty fuel filters protect your engine, enhance its performance and extend its life.
Extend the service life of your air compressor .
Protect your compressor with a double air filter.
The air compressor is equipped with a separate 2-stage air filtration system to protect all components from the harsh conditions on the construction site.

Product specifications series parameters

Item	Atlas portable air compressor
1	Model	XATS156C	XAHS166C	XAS186C
2	Volume flow m3/min	10	10	11.5
3	Working pressure bar	10.3	12	7
4	Air compressor oil volume L	23	25	25
5	Tank volume L	42
6	Diesel tank volume L	175
7	Noisy grade db(A)	80+3
8	Diesel engine	Cummins
9	Model	QSB3.9-C130
10	Air cylinder QTY	4
11	Engine kw	95
12	Full engine speed rpm	2300
13	Engine unloading speed rpm	1700
14	Overall Length (Trailer type) mm	4120
15	Overall Width mm	1900
16	Overall Height mm	2000
17	Overall Weight kg	1680
18	Exhaust valves QTYxsize	1×1 1/2”, 1×3/4”

FAQ

Q1: What’s your delivery time?
A: 15 days to produce, within 3 days if in stock.

Q2: What’s methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.

Q3: What about the shipments and package?
A: 40′ container for 2 sets, 20′ container for 1 set,
Machine in nude packing, spare parts in standard export wooden box.

Q4: Have you got any certificate?
A:We have got ISO,CE certificate.

Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.

Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is 1 year for the machine.

Q7: Can I trust your company ?
A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online
Lubrication Style:	Lubricated
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

Are there air compressors specifically designed for high-pressure applications?

Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:

1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.

2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.

3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.

4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:

Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.

5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.

When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.

High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.

China manufacturer 12 Bar Diesel Portable Screw Air Compressor Capacity 10m3/Min 353 Cfm air compressor for car
editor by CX 2024-04-23

China wholesaler New 13 Bar 13m3/Min Similar CHINAMFG CHINAMFG Rand CHINAMFG Ols130 D-13 Engine Portable Screw Air Compressor with CE Certificate Air Compressor air compressor price

Product Description

Oaliss’s objective is to be “Your very own system provider”. To fulfill this objective, CHINAMFG pays great attention to customer’s real needs and concerns, then provides feasible solutions. CHINAMFG chooses the most reliable suppliers from the industry and tests its performance before installing on our equipment. Product quality is our paramount goal. In the meantime, we do our best to fill the gaps between price and energy efficiency. Our equipment will be reliable enough to use and the price low enough to purchase. Combined with these distinct features, our high quality and variable products have been accepted by customers from various industries. Oaliss-your very own system provider.

Oaliss-your very own system provider.

Specification

Item	Description
Type	Diesel portable screw air compressor
Warranty	1 Year
Applicable Industries	Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works, Energy & Mining, Food & Beverage Shops, Other, Advertising Company
After Warranty Service	Spare parts
Local Service Location	Thailand, Vietnam, Pakistan, Russia, Sri Lanka
Showroom Location	Thailand, Vietnam, Pakistan, Russia, Sri Lanka
Video outgoing-inspection	Provided
Machinery Test Report	Provided
Marketing Type	New Product 2571
Place of CHINAMFG	China
Brand Name	Oaliss

Oaliss’s portable diesel compressor is best suited for the construction industry. It has become the best friend for customers that need to take the tools to perform their work with them.

Developed in conjunction with energy efficiency, Oaliss’s portable compressor will stand the test of time as well as providing you with the ability that easy to move, easy to operate, and easy to service.

Reliable
Famous brand diesel engine, fitted with double air filters and heavy duty oil filter which could protect the compressor and improve reliability of the whole machine.

Energy efficiency
Smartly auto detect the running status, loading and unloading stage could be easily changed with actual working status, reduce the fuel consumption.

Power expert
Automatically detect the vessel pressure, then adjust the engine speed accordingly. The compressor could provide more volume during drilling operation.

Technical specifications 1

Com pressor		OLS30 D-7	OLS40 D-8	OLS50 D-8	OLS80 D-7	OLS100 D-8	OLS100 D-12
Working pressure	bar (g)	7	8	8	7	8	12
Free air delivery (FAD)	m3/min	2.5	3.5	5.2	8	10	10
Compression stages		One stage	One stage	One stage	One stage	One stage	One stage
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	2 x ¾”	2 x ¾”	3 x ¾”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”
Engine
Brand		Xichai	Xichai	Xichai	Xichai	Xichai	Xichai
Emissions regulation	CHN
Output at rated speed	kW/hp	20.6/28	26.5/36	36/49	49/66.5	81/110	96/130
Displacement	L	1.6	1.5	2.4	3.3	3.9	3.9
Fuel tank capacity	L		90	100	120	120	120
Rated speed	rpm	2200	3000	2200	2000	2200	2500
Dim ensions and weight
Length	mm	1860	2450	2450	2840	3380	3380
Width	mm	980	1330	1330	1680	1855	1855
Height	mm	1350	1500	1550	1885	2175	2175
Weight	kg	500	1070	1310	1710	2100	2100

Technical specifications 2

Com pressor		OLS130 D-13	OLS110 D-17	OLS120 D-8	OLS130 -17	OLS130 D-18	OLS150 D-18
Working pressure	bar (g)	13	17	8	17	18	18
Free air delivery (FAD)	m3/min	13	11	12	13	13	15
Compression stages		One stage	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	2×1/₄“	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”	1x¾”&1×1½”
Engine
Brand		Xichai	Yuchai	Cummins	Cummins	Yuchai	Yuchai
Emissions regulation	CHN
Output at rated speed	kW/hp	118/160	118/160	96/130	132/180	140/190	162/220
Displacement	L	4.8	4.8	3.9	5.9	6.5	7.8
Fuel tank capacity	L	180	180	180	180	320	270
Rated speed	rpm	2000	2200	2500	2200	2200	2200
Dim ensions and weight
Length	mm	2500	3260	3380	3505	3500	3460
Width	mm	2100	1950	1855	1950	2060	2040
Height	mm	2200	2150	2175	2190	2200	2280
Weight	kg	3200	2620	2570	2700	2700	2650

Technical specifications 3

Com pressor		OLS150 D-20	OLS160 D-8	OLS180 D-20	OLS185 D-20	OLS210 D-23	OLS230 D-25
Working pressure	bar (g)	20	8	20	20	23	25
Free air delivery (FAD)	m3/min	15	16	18	18.5	21	23
Compression stages		Two stages	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	1x¾”&1×1½”	1x¾”&1×1½”	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″
Engine
Brand		Cummins	Cummins	Yuchai	Cummins	Cummins	Cummins
Emissions regulation	CHN
Output at rated speed	kW/hp	160/215	110/150	191/260	194/260	242/325	264/360
Displacement	L	8.3	5.9	8.3	8.3	8.9	8.9
Fuel tank capacity	L	320	180	320	320	380	380
Rated speed	rpm	2200	2200	2200	2200	2100	2100
Dim ensions and weight
Length	mm	3465	3580	3660	3660	3660	3660
Width	mm	1800	2060	1900	1900	1980	1980
Height	mm	2310	2190	2310	2310	2480	2480
Weight	kg	4135	2700	4290	4290	5080	5200

Technical specifications 4

Com pressor		OLS240 D-8	OLS300 D-23	OLS350 D-25	OLS350 D-30	OLS470 D-13	OLS670 D-13
Working pressure	bar (g)	8	23	25	30	13	13
Free air delivery (FAD)	m3/min	24	30	35	35	47	67
Compression stages		Two stages	Two stages	Two stages	Two stages	Two stages	Two stages
Approx. outlet temperature	°C	<120	<120	<120	<120	<120	<120
Air compressor outlets	inches	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	1×1″&1×2″	DN125	DN125
Engine
Brand		Cummins	XiChai	Cummins	Cummins	Cummins	Cummins
Emissions regulation	CHN
Output at rated speed	kW/hp	160/215	310/420	410/550	410/550	410/550	563/755
Displacement	L	8.3	11	13	13	13	19
Fuel tank capacity	L	320	875	620	950	250	380
Rated speed	rpm	2200	2000	1900	1900	1900	1900
Dim ensions and weight
Length	mm	3660	3675	3800	4250	3800	4400
Width	mm	1980	1950	2100	2100	2200	2500
Height	mm	2310	2500	2325	2900	2400	2560
Weight	kg	4380	7000	8100	6500	8500	9500

Industrial equipment, printing service, pipelines, power plants, oil&gas, oil refinery, coating, painting,
plastics, steel industry, rubber, mechanical, blow molding, color sorter machine, shipyard, sandblasting,
metallurgy, etc.

To provide the right equipment to you, please send us your detailed requirements.

1 Q: How about the quality of products?

A: We are an authorized distributor of Atlas Copco. Don’t worry about the quality and service.

2 Q: How long is your delivery lead time?

A: If there is stock, the lead time is about 3 working days after we get the payment if need to
be produced, it depends.

3 Q: How about your overseas after-sale service?

A: (1)Provide customers with installation and commissioning online instructions.

(2)Worldwide agents and after service available.

4 Q: Can you accept OEM&ODM orders?

A: Yes, we have a professional design team, OEM&ODM orders are highly welcomed.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	Diesel Engine
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China wholesaler New 13 Bar 13m3/Min Similar CHINAMFG CHINAMFG Rand CHINAMFG Ols130 D-13 Engine Portable Screw Air Compressor with CE Certificate Air Compressor air compressor price
editor by CX 2024-04-16

China Best Sales Chinese 22 Bar Air Compressor 24m3/Min Stationary Screw Air Compressor for Sale air compressor for car

Product Description

Diesel Utility Mounted Compressors – Two-stage screw compression – Utility truck mounted

Product Description

1. Complete variety series, many advantages:
Small size, light weight. Low noise. Stable and reliable performance. Long service life. Easy to maintain. Low maintenance costs.
2. Technical agglomeration, comprehensive performance of machinery:
This series of products are designed for engineering mines with
φ80-110mm bore drill, anchor drill, all kinds of pickaxes, rock drills, shotguns and all kinds of air sources.
Series of products focus on reliability, robust based on the optimized control system, greatly reducing the energy consumption of products;
The whole series of products adopt the national II/III/IV engine.
3. Close to the actual needs of users:
The complete series of products, the exhaust volume has been from small to large, which meets the needs of air mechanical and gas such as air -drifting machines such as pneumatic rock drills. There are diverse structures, suitable for different users. Low-quality, low investment costs.

Model and technical parameters

Model	Rated FAD	Rated Pressure	China II engine	China III engine	China IV engine	Diesel tank volume	Air End	Weight	Dimensions (LxWxH)
S60T	18 m³/min	18 bar	/	Yuchai /162kW	Yuchai /162kW	230 L	Two Stage Compre -ssion	3050kg	3220×1670×2150 mm
S85T	24 m³/min	22 bar	Cummins / 239 kW	Yuchai / 228 kW	Weichai /221kW	350 L		3450kg	3560×1830×2100 mm
S95T	29 m³/min	24 bar	Yuchai /295kW	Yuchai /295kW	Yuchai /295kW	415 L		4300kg	3950×2000×2550 mm
S98T	30 m³/min	24 bar	Yuchai /295kW	Yuchai /295kW	Yuchai /295kW	415 L		4350kg	3950×2000×2550 mm
S100T	31 m³/min	25 bar	Xichai / 309 kW	Xichai / 309 kW	Xichai /309kW	415 L		4550kg	3950×2000×2550 mm
S125D	36 m³/min	30 bar	/	Cummins /410kW	/	600 L		5500kg	4220×2000×2300 mm

FAQ
Q1: What’s your delivery time?
A: 15 days to produce, within 3 days if in stock.

Q2: What’s methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.

Q3: What about the shipments and package?
A: 40′ container for 2 sets, 20′ container for 1 set,
Machine in nude packing, spare parts in standard export wooden box.

Q4: Have you got any certificate?
A:We have got ISO,CE certificate.

Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.

Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is 1 year for the machine.

Q7: Can I trust your company ?
A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online
Lubrication Style:	Oil-free
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the differences between stationary and portable air compressors?

Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:

1. Mobility:

The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.

2. Power Source:

Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.

3. Tank Capacity:

Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.

4. Performance and Output:

The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.

5. Noise Level:

Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.

6. Price and Cost:

Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.

When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

China Best Sales Chinese 22 Bar Air Compressor 24m3/Min Stationary Screw Air Compressor for Sale air compressor for car
editor by CX 2024-04-11

China Best Sales Electric 1.5HP 40L 8 Bar Portable 110V 220V Small Direct Driven Air Compressor air compressor oil

Product Description

electric 1.5hp 40L 8 bar portable 110v 220v small direct driven air compressor

Main features :

lower power consumptin,light weight,small volume,lower noise and vibration,stable performance,easy in operation

Quality&Inspection:
100% check spare parts quality which produced from matching suppliers.
QC checking each step from spare parts to production on the full of line.

Package:
Standard exported carton, 5 layers browb box.
We will use standard exported package if no special requirments.

Detailed Photos

Company Profile

Packaging & Shipping

Fast shipping ,best shipping way, good aftersales service

FAQ

1.Q:Can I get some samples?

A:We are honored to offer you samples for quality check.

2.Q: Do you have the products in stock?

A:Yes , We have sample for several models now could supply to you.

3.Q: What’s the delivery time?/span>

A:It usually takes about 30 days to produce an order from MOQ to 20FT container. But the exact delivery time might be different for different orders or at different time.

4.Q:Can I mix different models in 1 container?

A:Yes, different models can be mixed in 1 container, but the quantity of each model should not be less than MOQ.

5.Q:How does your factory do regarding quality control?

A:Quality is priority..People always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it’s packed for shipment.

6.Q:What are your warranty terms?

A:We offer different warranty time for different products. Please contact with us for detailed warranty terms.

7.Q:What’s the payment you accept ?

A: As usual our payment is 30%T/T as deposit and 70%T/T against the copy of B/L. But we could also accept the payment such as L/C , Or PayPal .

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical
Structure Type:	Semi-Closed Type
Compress Level:	Single-Stage

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

What is the energy efficiency of modern air compressors?

Variable Speed Drive (VSD) Technology:

Air Leakage Reduction:

Efficient Motor Design:

Optimized Control Systems:

Air Storage and Distribution:

Energy Management and Monitoring:

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

China Best Sales Electric 1.5HP 40L 8 Bar Portable 110V 220V Small Direct Driven Air Compressor air compressor oil
editor by CX 2024-04-10

China Standard CHINAMFG Rotary Screw Air Compressor Ws Series Ws1800/Ws2200/Ws3000/Ws3700/Ws4500/Ws5500/Ws7500 7.6bar/8.6bar/10.6bar/12.6 Bar air compressor CHINAMFG freight

Product Description

Quick Details
Place of Origin:ZheJiang , China
Dimension(L*W*H):1800*600*1560
POWER:5.5KW,7.5HP
PRESSURE:7/8/10/12BAR
FLOW RATE:0.79M3/MIN
AIR END:PERMANENT MAGNET SYNCHRONOUS ONE-PIECE
COOLING:AIR
DRIVE METHOD:DIRECT CONNECTION
ENVIRONMENT TEMPERATURE:-5—–+45ºC
NOISE:62±2DB
COLOR:blue , grey , yellow for your choose
OEM:WELCOMED
Weight:380KG
After-sales Service Provided:Engineers available to service machinery overseas
Warranty:1 year for machine, 2 years for air end
Configuration:stationary
Lubrication Style:Lubricated
Type:SCREW
Voltage:380V/220V/415V
Condition:New
Certification:CE, ISO,ASME,DOSH,PED,MOM
Power Source:AC POWER
Mute:lower noise

Supply Ability
Supply Ability:3000 Piece/Pieces per Month

Packaging & Delivery
Packaging Details:Besides the Plywood case package,the CHINAMFG also wrapped with foam strip.
Port:HangZhou
Lead Time :about 25 days
After- sales service :
1. Sample order
2. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test it, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solution for you.

Products Description

Established in 1965 , CHINAMFG Corporation, a whole-owned company of United Technologies Corporation (Abbr. UTC, which was ranked the 112th among the Global 500 by Fortune Magazine in 2011), is 1 of the world’s leading authorities on rotary screw compression technology. Since it began manufacturing rotary screw compressors in 1965, CHINAMFG has focused on this oil-free area of specialization. CHINAMFG uses its extensive resources of UTC to further develop and advance oil-free rotary screw technology. The company has made great achievements in the field. Its water-flooded oil-free twin screw compressors are utilized in various industrial fields, such as electronics,hospital/medical supply,container manufacturing,food packaging,etc.

Sullair products are known around the world for their universally applicable design, outstanding craftsmanship and superior quality. WS series (18- 75kW) compressor, which are environmental, reliable, quiet, with excellent performance and easy to be maintained, has been provided by sullair. These machines have redefined industry standards for continuousduty compressors in the 18-75KW range.

Standard Features

•Low restriction inlet valve for better cfm performance

•Low life cycle costs including long-life bearings, rotors, and the air end

•Nema 4 standard and excellent motor cooling design characteristics for longer motor life

•WS microprocessor standard

•Optimalair air filter provides 10 times better filtration than other filters

•Sullube -8000-hour non-varnishing, biodegradable compressor fluid and less than 2 ppm fluid carryover

•Sequenced standard

•Smallest footprint in its class

•Quietest in its class, as low as 67 dBA

•Environmental, health, and safety design features

Quiet Design

This CHINAMFG series incorporates many design features to reduce the noise of the machine.

Air end, motor and receiver tank are mounted on rubber isolator
Insulate intake and exhaust louvers
Low-noise fan

In fact, these compressors are so quiet they can be installed anywhere in your facility.

5-Year Warranty on CHINAMFG Air End

In normal ambient condition, when used according to CHINAMFG recommendations, we guarantee the Air ends:

• No quality problems for 5 years

• No change in performance for 5 years
Product Parameters

Detailed Photos

Company Information

Upet Oilfield Equipments Co.,Limited, located near the famous CHINAMFG Oilfield, is 1 of the most CHINAMFG suppliers for the oilfield equipments in China, with our persistant efforts step by step in the past years, CHINAMFG now has grown up to a star company which is not big but very strong in this field.
UPET products cover the whole areas of the wellsites, from a very small spare part to a big complete rig system. CHINAMFG designs, manufactures and markets various kinds of oilfield equipments including drilling equipments,production equipments, well service equipments and line pipes etc. Our main products are: mud pumps, mud pump spare parts, Coiled Tubing Unit,Coiled Tubings,DC/AC Motors, CHINAMFG control equipments, power units, truck-mounted rigs, workover rigs, land rigs, drilling pipes drilling tools,Pneumatic and Hydraulic Parts etc. All of our products are manufactured according to the API Standard, and we are authorized to use API monogram.
We understand the needs of the operators and drilling contractors around the world. High quality, competitive prices and fast delivery are our top priorities.Our products have been exported to more than 30 countries& areas around the world, 90% of our exsisting customers have done the business with us by more than 5 times, no one-off customer. We will continue to expand our range, and win more customers’ trust with our better and better performance.
We welcome the CHINAMFG cooperation relationship with the partners from any places in the world, each customer is our god and helper. Warmly welcome you to come to China and visit us!
With us, you will save money, time, trouble, and most important point is that you can sleep better.

FAQ
Q1. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q4: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty:	1 Year
Colour:	Customer Requirement
Condition:	New
Transport Package:	Standard Export Package
Specification:	7.6Bar/8.6Bar/10.6Bar/12.6 Bar
Trademark:	SULLAIR

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

1. Power Source:

2. Environmental Conditions:

3. Accessibility and Transport:

4. Maintenance and Service:

5. Fuel and Lubricants:

6. Noise and Environmental Impact:

7. Communication and Remote Monitoring:

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China Standard CHINAMFG Rotary Screw Air Compressor Ws Series Ws1800/Ws2200/Ws3000/Ws3700/Ws4500/Ws5500/Ws7500 7.6bar/8.6bar/10.6bar/12.6 Bar air compressor CHINAMFG freight
editor by CX 2024-03-29

China supplier 2.2 Kw 3 HP Small Silent 8 Bar 10 Bar 12 Bar Oilless Direct Drive Pm VSD Oil Free Scroll Type Air Compressor for Dental/Laboratory/E-Mobility Bus/Food/Medical small air compressor

Product Description

8~12bar DIRECT-DRIVE OIL-FREE SCROLL AIR COMPRESSOR (PM VSD)

Precision air end(2 years warranty)
High precision, stiffness, and durable square air-end ensure max pressure 12bar.
IP67 protection level, F insulation level, Efficiency is improved 10%

PM motor & Variable frequency inverter
VSD soft no current impact. Inverter adjusts motor speed automatically, saving energy and long service life.

Direct drive
The motor is connected with the air-end directly, without THE belt, coupling, no need for adjustment, super low noise

I ndividual cooling fan
Low discharge compressed air temperature after cooled by an individual fan to ensure the low-pressure dew point.

Purity stainless steel air tank
Stainless Steel pipe and connection

Super quiet
Smart structure and advanced soundproof casing to reduce the noise to 49dB(A)

Intelligent PLC controller
Display operation situation of air-end
Remind maintenance timely

Product Parameters

Product Description

1. The orbiting scroll and fixed scroll housing are mated to create the compression chambers.
2. The continual movement of the orbiting scroll moves atmospheric air from the intake toward to the center, compressing the air into progressively smaller areas.
3. The continual movement of the orbiting scroll moves atmospheric air from the intake toward to the center, compressing the air into progressively smaller areas.

Hot Sale Products

2~10bar Oil-injected 7~16bar All-in-1 Small Single-phase
Screw Air Compressor Screw Air Compressor Screw Air Compressor

2~40bar 100% Oil-free 8~12bar 100% Oil-free Diesel Engine Portable
Screw Air Compressor Scroll Air Compressor Screw Air Compressor

Main Product

What we can supply:

* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* Single-phase Small Screw Air Compressor for Home use (8~10 bar)
* Water-injected Oil-free Screw Air Compressor (2~40 bar)
* Oil-free Scroll Air Compressor (8~12 bar)
* Diesel&Electric Engine Portable Screw Air Compressor (8~30 bar)
* Air Dryer, Air tank, Filters, and other Spare parts

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	24*7 Online Services and Video Guide
Warranty:	1 Year for The Whole Machine & 2 Years for Air End
Installation Type:	Stationary Type
Lubrication Style:	Oil-free
Product Name:	Oil-Free Scroll Air Compressor
Working Pressure:	8~12 Bar

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China supplier 2.2 Kw 3 HP Small Silent 8 Bar 10 Bar 12 Bar Oilless Direct Drive Pm VSD Oil Free Scroll Type Air Compressor for Dental/Laboratory/E-Mobility Bus/Food/Medical small air compressor
editor by CX 2024-03-27

China best 7.5kw 10HP 16 Bar All in One Belt Direct Driven Screw Air Compressor with Air Dryer arb air compressor

Product Description

1.Specification:

all in 1 type
model	power(kw)	pressure(bar)	capacity(m³/min)	startup mode	tank/L	dimension(L×W×H)cm	weight(kg)
SY-10A All in One	7.5	16	1.1	Fixed Speed	250	155×62×158	280

2.Feature:

capacity:0.6-1.6m3/min
pressure:1.6MPa
power:11-22kw
startup mode: Permanent Magnet Frequency

Performance characteristics
Laser cutting is a new kind of high-tech cutting technology, which USES energy laser beam to cut, and has the advantages of high cutting efficiency and smooth machining end face. It is wide KB used in machinery, hardware and other industries. For the air source used by laser cutting (oxygen, nitrogen, air), air has its unique advantages.low cost,cutting some materials can exceed the effect of oxygen and nitrogen, the system has been successful KB used in the laser cutting industry.
1.built-in cold dryer and air compressor integrated design, all built-in air compressor in the whole machine, cold dryer using high-efficiency three-in-1 stainless steel plate heat exchange, plate heat exchange advantages are as follows: air dryer special plate heat exchange, save space except small volume, and high heat transfer efficiency, both pre-cooler (return temperature), evaporator, air-water separator 3 machines, air-water separation structure and conventional filter without filter and other consumables, avoid blockage.
2.Hidden double tank design professional hidden two-in-1 gas storage tank to avoid frequent start and stop of air compressor system pressure stability at the same time provide stable pressure clean compressed air. One is to reduce pressure fluctuations, reduce start and stop, energy saving; the other is clean gas pressure stability, after shutdown has a certain ability to continuously supply clean gas sources.
3.The design of skirt soundproof air inlet structure can quickly cool the surface of gas storage tank, there is no air inlet on the whole air compressor box, all cooling air enters the machine from the skirt structure, Cooling air through the skirt air inlet at the same time to cool the gas tank surface to minimize the cold dryer load.
4.The unique skirt silencing structure gas storage tank is an arc structure, the noise reflector is pasted with sound-absorbing cotton to reduce the reflected noise, and the arc surface is reflected to the skirt to reduce the direct leakage of noise to reduce the noise.
5.Integrated control system one-button switch machine, automatic operation control. Integrated automatic operation and alarm display is clear.

3.Compressed Air Solutions:

All the professionalism you need to have your correct supply of AIR(Air Volume, Air Pressure and Air Quality)
• When it comes to air (you need it, we have it).
• Piston compressors Cast Iron, Aluminum.
• Screw compressors, and all compressor accessories.
• Motors, Air Pumps, Regulators, Filters, Dryers, after coolers and so on.
• Our Heavy Duty Air Compressors with a sense of(Quality saves your cost)
• Unique Design and Engineering, special Machining Standards.
• Skilled labor for assembly line, backed up with technical support worldwide.

4.About us:

Founded in 2571, ZheJiang CHINAMFG HangZhoui Technology Co., Ltd. is a subsidiary of CHINAMFG Electrical Stock Company,The company mainly produces air compressors,air blower,baking burner for tobacco and equipment. The company’s sales and operation headquarters is located in ZheJiang , the main production base is located in the eastern new area of HangZhou City, ZHangZhoug Province, covering an area of nearly 100 mu, with nearly 90,000 square production workshop, at the same time in ZheJiang HangZhou District CHINAMFG production base. Adhering to the corporate culture of CHINAMFG COMPANY “quality creation Sayi, credibility and integrity based on the world “, the company actively develops, forge ahead, and is committed to building the company into an international company with core competitiveness and leading the innovation and development of the industry.

5.Why you choose us:

6.FAQ:
Q1: Are you the manufacturer or trading company?
A1: We are the manufacturer.

Q2: Where is your factory?
A2: It is located in HangZhou City, ZHangZhoug Province, China.

Q3: What’s the terms of trade?
A3: FOB,CFR,CIF or EXW are all acceptable.

Q4: What’s the terms of payment?
A4: T/T,L/C at sight or cash.

Q5: How long is your delivery time?
A5: Generally it is 5-10 days if the goods are in stock or it is 20-30 days if the goods are not in stock, it is according to quantity.

Q6: What is the advantage about your company?
A6: Our company has professional team and professional production line.

Q7: If we travel to China to checking your facility, are you welcome?
A7: Of course, why not? We will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport, living in our company’s hotel, and driving by car take you visiting our company. Warm Welcome!

Q8: How Many Years of your company working in this industry?
A8: We have 20-year experience in this field.

7. Contact us:

ZheJiang CHINAMFG HangZhouI TECHNOLOGY CO., LTD.
Address:Company Address: O Block,10th Floor,768 Xietu Road, Xihu (West Lake) Dis. District, ZheJiang
Address:ZHangZhoug Factory Address :23rd Street, New Eastern District, HangZhou City, ZHangZhoug Province
Address:ZheJiang Factory Address :1515 Xihu (West Lake) Dis. Road, Luojing Town, HangZhou District, ZheJiang
Phone:571-633 0571 1

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	New Replacement
Warranty:	1year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

Nitrogen
Oxygen
Hydrogen
Carbon dioxide
Natural gas
Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Air Pressure Regulation:

Air Volume and Flow:

Tool Actuation:

Versatility:

Portability:

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

China best 7.5kw 10HP 16 Bar All in One Belt Direct Driven Screw Air Compressor with Air Dryer arb air compressor
editor by CX 2024-03-27

China high quality Industrial Low Noise 6/7/8/9 Bar 22 Kw Electric Permanent Magnet Rotary Screw Air Compressor air compressor repair near me

Product Description

Industrial low noise 6/7/8/9 bar 22 kw electric permanent magnet rotary screw air compressor

Motor
The motor with protection class IP54is used, the insulation class is F grade,and the bearing is made of SwedishSKF heavy bearing.

Air end
Adopting twin-screw main engine, largerotor and low speed design, new 5:6asymmetric rotor tooth profile, brandbearing, determines the excellent performance of the whole machine.

Intake valve
The red star intake valve can automaticallyadjust the gas volume according to the requirements of the system gas consumption,reducing operating costs.

MPV

Made of aluminum, it has outstanding antirust performance. With check function.The stable setting of the opening pressureensures that sufficient circulation pressureis established in the system to ensure lubrication of the machine body.

Cooling system
Feature:Large cooler system
Advantage:Axial flow Fan used forgood cooling effect
Benefit:Allow ambient temperature at 52″C.

Smart display screen
Feature:Intelligent control systemAdvantage:10 inch monitor to showall the date
Benefit:Simple operation and trouble free

Oil and gas separator
With the Apuda oil and gas separator,the rigorous oil and gas separationfilter can reduce the oil content of theexhaust gas in the compressor andthe fuel consumption of the unit.

The durable pipe system
The galvanized pipe is more durable, sturdy, longer, longer, and durable.

Specification

Model	Working Pressure		Air Delivery		Motor Power	Type of Driving	Type of Cooling	Dimension(mm)			Weight	Output pipe
	psig	bar	cfm	m3/min	kw/hp			L	W	H	(kg)	Diameter
GLDS-10A	100	7	38.8	1.1	7.5/10	Driect driven	Air Cooling	850	650	800	240	3/4″
	116	8	35.3	1
	145	10	30	0.85
	181	12.5	24.7	0.7
GLDS-15A	100	7	63.6	1.8	11/15			1050	700	1000	450	3/4″
	116	8	58.3	1.65
	145	10	53	1.5
	181	12.5	45.9	1.3
GLDS-20A	100	7	84.7	2.4	15/20			1050	700	1000	450	3/4″
	116	8	77.7	2.2
	145	10	74.2	2.1
	181	12.5	63.6	1.8
GLDS-25A	100	7	109.5	3.1	18.5/25			1250	850	1100	620	1″
	116	8	102.4	2.9
	145	10	95.3	2.7
	181	12.5	81.2	2.3
GLDS-30A	100	7	134.2	3.8	22/30			1250	850	1100	620	1″
	116	8	127.1	3.6
	145	10	113	3.2
	181	12.5	88.3	2.5
GLDS-40A	100	7	187.1	5.3	30/40			1350	850	1040	680	1-1/2″
	116	8	176.6	5
	145	10	151.8	4.3
	181	12.5	127.1	3.6
GLDS-50A	100	7	233	6.6	37/50			1550	1571	1330	850	1-1/2″
	116	8	218.9	6.2
	145	10	201.3	5.7
	181	12.5	162.4	4.6
GLDS-60A	100	7	282.5	8	45/60			1550	1571	1330	850	1-1/2″
	116	8	271.9	7.7
	145	10	243.6	6.9
	181	12.5	211.9	6
GLDS-75A	100	7	370.8	10.5	55/75			1950	1270	1620	1800	2″
	116	8	346	9.8
	145	10	307.2	8.7
	181	12.5	257.8	7.3
GLDS-100A	100	7	480.2	13.6	75/100			1950	1270	1620	1900	2″
	116	8	459	13
	145	10	399	11.3
	181	12.5	356.6	10.1
GLDS-125A	100	7	572	16.2	90/125			2450	1600	1740	1950	2″
	116	8	543.8	15.4
	145	10	466.1	13.2
	181	12.5	395.5	11.2
Motor Efficiency Class: Ultraefficient/IE3/IE2 as per your required
Motor Protection Class: IP23/IP54/IP55 or as per your required
Certification: CE/ISO9001
Voltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok

Equipment manufacturing industry: spray painting, spray washing machine, mechanical retreat mold, driving the assembly tools, drilling machine, hammer, lifting driving, combined tools, reamer, run run run, riveter screwdriver rotary drive, forging, metal forming press run operation, blasting, spraying, transmission, driving technology process.
Automobile manufacturing industry: spray cleaning parts, driving the assembly tool, fixture tools, lifting hoist crane, pneumatic control, forging hammer pressing workshop, casting workshop, metal workshop blast spray.
Beverage factory: running, bottle washing machine barrel turn, cHangZhou machine internal spraying, cleaning, food industrial used gas drying bottle, automatic operation, ash dust.
Cement manufacturing: Lime storage ventilation, cement slurry stirring and driving, cement bag clean sealing driving, raw material mixing, tipper operation, cleaning equipment, clinker cooling, conveying of cement and coal, cement kiln cleaning, vehicle and vessel handling, lifting and hoisting device, pneumatic control.
Chemical plant: ventilation and mixing, separation tower with gas, cleaning equipment, combustion gas, transportation, lifting liquid, spraying and cleaning pipe, pneumatic control, process gas, liquid transport.
Power plant: air cleaning pipeline, blowing smoke scale, cleaning of boiler and condenser pipe, jet cleaning, coal, sewage removal transmission, pneumatic control.
Hydropower plant maintenance: engine control, lock, drive controller, drive lubrication pump, driving lock, starting control, cleaning rubbish net.
The food industry (general application): mixing liquid, fermentation tank with gas (oxygen), cleaning equipment, with nozzle with nozzle cleaning container transport, food, raw materials, filtration dehydration.
Forging shop: oxygen skin, door, air curtain lifting hoist and hoist, driving the bending and straightening machine, driving clutch brake and a clamping device, the driving hammer, drive the fuel regulator.
Casting: hot metal car positioning, cleaning equipment, transporting sand, drive pneumatic tools, ramming machine, grinding machine, lifting hoist and elevator, pneumatic pick, tamping machine, steel than the brush, sandblasting, sieve sand, mud core.
Glass factory: blow bottle and glass, blow lamp and electronic tube, combustion gas, raw material, light transmission glass etching and drilling, conveying the glass, pneumatic control, vacuum hanging board.
Iron and steel plant: stirring the solution, oxygen with gas, HangZhou gas, converter with skip positioning, a sediment chamber drilling, unloading bags, open hearth CHINAMFG flue cleaning, driving clutch and brake, drive door, driving loading and transporting device, drive lubrication system, drive pneumatic tools, pneumatic pick, grinding wheel machine, lifting hoist and hoist, sandblasting, blast furnace, vacuum degassing furnace.
Wood, furniture processing: spray cleaning, gas lifting, bending, straightening, disseminated wood clamping clamp, pneumatic tools, carving tools, drilling machine, polishing machine, polishing machine, sand blasting, spray painting, spray device.
Sheet metal workshop: stirring the solution, transportation, jet cleaning, drive chip packaging press, driving plate chuck clutch and positioner, pneumatic tools, pneumatic pick, finishing hammer, drill, grinding wheel machine, crane and elevator, combination tools, riveting machine, sand blasting, spray, spray paint, lubricant container leakage detecting.
The mine ventilation gas, drilling: big hole, gas water removal, filtration fine crumbs, pneumatic hoist driven rock drill rig,,, blow hole, piling machine, drilling machine.
Oil refinery: combustion gas, emptying and cleaning oil, crane and elevator, drive control system, catalyst recycle, sandblasting, painting.
Papermaking factory: clean air equipment, crane and hoist, pool anti icing, roll feeding, pressing paper products, drive clutch, drive off paper machine, paper feeding through the machine, pneumatic control, pressure head box, demolition, removal of waste paper head box, vacuum drying.
Pharmaceutical manufacturers: mixing liquid, antibiotic fermentation with gas (oxygen), transmission of raw materials, raw materials, mixing and stirring driven, pneumatic control, air jet pulverization, spray drying, vacuum drying and vaporization of liquid, transmission.
Plant maintenance: jet cleaning, drive tools (hammer, concrete vibrator, drill, grinding wheel machine, crane, paving stone machine, riveter, oxide skin to wrench, winding machine, sand blasting, spray), metal, spray, spray system.
Textile factory: mixing liquid, gas lifting, moist, operation pressure accumulator, spray, spray system, transfusion.
Rubber factory: clean mold and mechanical devices, gas lifting, demoulding, mold, pneumatic control, spraying.

ZheJiang GLADES MACHINERY EQUIPMENT CO.,LTD.is located in HangZhou -logistics city , with the advantage of rapid transportation of goods. The company covers an area of more than 20 thousand square meters.with an annual output value of 6 million US dollars and fixed assets more than 10 million US dollars.

Glades’s primary businesses focus in following key areas:Oil-injected rotary screw compressors (Fixed speed and variable speed; normal and low pressure),Oil free screw air compressors (Scroll type, dry type, water-lubricated type),Energy Saving Screw Air Compressor(PM VSD screw air compressor,Two Stage Screw Air Compressor,Scroll screw air compressor),Portable screw air compressors ( electric motor powered),Air treatment equipment (Air dryers, air filters and air receiver tank) .At Glades, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. Glades has been exporting to more than 35 countries across the globe.
Upholding the core concept of “Reliable Carrying Trust”, ZheJiang Glades strives to provide the most reliable products and services through continuous innovation, so that customers can continue to obtain the maximum value for their returns.
Advantages:
Large displacement: Displacement 10% higher than ordinary piston compressor.
Energy-saving: Compared with piston air compressor, this series of models for the new national standard 2 energy efficiency products, excellent energy saving.
Easy to operate: 24 hours unattended all day work, free load automatically start, full load automatically shut down.
Strong stability:Under long time working, displacement and pressure stable, no crash phenomenon, low failure rate.

FAQ:
Q1:Where is your factory located?
A:Our factory is located in HangZhou city which nears HangZhou port about 2 hours.

Q2:How many air compressors do you produce everyday?
A: We can produce 100 pieces everyday.

Q3: Can you use our brand?
A: Yes, OEM/ODM is available.

Q4:How about your after-sales service?
  a.Provide customers with installation and commissioning online instructions.
  b.Well-trained engineers available to overseas service.
  c.CHINAMFG agents and after service available.

Q5:What’s your delivery time?
Generally 15 to 20 days, if urgently order, pls contact our sales in advance.

Q4: Why should I choose you?
1. 24/7 after sales service support in different languages;
2. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center;
3. Technical training for customers in Glades air compressor factory or working site;
4. Plenty of original spare parts with proven quality are all available.

5.All kinds of technical documents in different languages.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	24 Hours Online Service
Warranty:	1year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

How are air compressors employed in the petrochemical industry?

Air compressors play a vital role in the petrochemical industry, where they are employed for various applications that require compressed air. The petrochemical industry encompasses the production of chemicals and products derived from petroleum and natural gas. Here’s an overview of how air compressors are utilized in the petrochemical industry:

1. Instrumentation and Control Systems:

Air compressors are used to power pneumatic instrumentation and control systems in petrochemical plants. These systems rely on compressed air to operate control valves, actuators, and other pneumatic devices that regulate processes such as flow control, pressure control, and temperature control. Compressed air provides a reliable and clean source of energy for these critical control mechanisms.

2. Pneumatic Tools and Equipment:

Petrochemical plants often utilize pneumatic tools and equipment for various tasks such as maintenance, repair, and construction activities. Air compressors supply the necessary compressed air to power these tools, including pneumatic drills, impact wrenches, grinders, sanders, and painting equipment. The versatility and convenience of compressed air make it an ideal energy source for a wide range of pneumatic tools used in the industry.

3. Process Air and Gas Supply:

Petrochemical processes often require a supply of compressed air and gases for specific applications. Air compressors are employed to generate compressed air for processes such as oxidation, combustion, and aeration. They may also be used to compress gases like nitrogen, hydrogen, and oxygen, which are utilized in various petrochemical reactions and treatment processes.

4. Cooling and Ventilation:

Petrochemical plants require adequate cooling and ventilation systems to maintain optimal operating conditions and ensure the safety of personnel. Air compressors are used to power cooling fans, blowers, and air circulation systems that help maintain the desired temperature, remove heat generated by equipment, and provide ventilation in critical areas.

5. Nitrogen Generation:

Nitrogen is widely used in the petrochemical industry for applications such as blanketing, purging, and inerting. Air compressors are utilized in nitrogen generation systems, where they compress atmospheric air, which is then passed through a nitrogen separation process to produce high-purity nitrogen gas. This nitrogen is used for various purposes, including preventing the formation of explosive mixtures, protecting sensitive equipment, and maintaining the integrity of stored products.

6. Instrument Air:

Instrument air is essential for operating pneumatic instruments, analyzers, and control devices throughout the petrochemical plant. Air compressors supply compressed air that is treated and conditioned to meet the stringent requirements of instrument air quality standards. Instrument air is used for tasks such as pneumatic conveying, pneumatic actuators, and calibration of instruments.

By employing air compressors in the petrochemical industry, operators can ensure reliable and efficient operation of pneumatic systems, power various tools and equipment, support critical processes, and maintain safe and controlled environments.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

China high quality Industrial Low Noise 6/7/8/9 Bar 22 Kw Electric Permanent Magnet Rotary Screw Air Compressor air compressor repair near me
editor by CX 2024-03-13