Tag Archives: air compressor 20hp

China manufacturer 15kw 20HP OEM Fixed Speed Industrial Screw Air Compressor wholesaler

Product Description

Genuine original air end system
·Original CHINAMFG air end
·The third generation screw rotor profile, 5:6 asymmetric rotor
·Large rotor, low rotation speed, low specific power
·Sweden CHINAMFG element bearings ensure the ultra-long service life of the air end

High efficiency permanent magnet motor
·Using high-performance permanent magnets, no loss of magnetism at 200°C
·IE3 Premium Efficiency
·IP55 degree of protection, Class F insulation, Class B temperature rise
·High transmission efficiency, service life of up to 15 years

High-efficiency air filter
·Filtration accuracy up to 99.5%
·Dust particles below 0.1 CHINAMFG
·Service life up to 3000 hours

High-efficiency oil filter
·Filtration accuracy up to 99.5%
·Oil particles can be controlled at 0.1 CHINAMFG
·Service life up to 3000 hours

High-efficiency oil gas tank
·Oversized oil gas tank improves the cyclone effect maximizing the separation process
·The high-efficiency oil gas separator ensures that the oil content is less than 2ppm
·System pressure drop is less than 0.2bar
·Service life of oil gas separator is up to 3000 hours

Energy-saving air inlet valve
·Large suction area
·Low load energy consumption in unloaded operation
·Cast aluminum maintenance free design
·Fast check: prevent unloading and shutdown oil injection

Classic cooler design
·Oversized cooler design
·Easy access for maintenance
·Anti-corrosion coating on surface

High-quality cooling fan
·Compact
·Low noise level
·High capacity for optimized cooling
·Low power consumption

Highly integrated microcomputer controller
·7.0 inch full color touch screen
·Full graphical flow diagram
·Multiple languages
·Real-time operation/maintenance/alarm information
·Operation record/chart display
·Weekly and daily scheduling, service history and plHangZhou
·On board RS485 interface, Modbus RTU

Product Parameters

Model	Motor Power		Maximum Working Pressure		Free Air Delivery		Air Outlet Pipe Diameter	Weight	Dimensions(LWH)
Model	kW	hp	bar(g)	psig	m³/min	cfm	Air Outlet Pipe Diameter	kg	mm
BG10A	7.5	10	7	102	1.2	42	G1/2″	190	900650850
			8	116	1.1	39
			10	145	0.9	32
			13	189	0.7	25
BG15A	11	15	7	102	1.7	60	G3/4″	320	10607501000
			8	116	1.6	57
			10	145	1.3	46
			13	189	1.0	35
BG20A	15	20	7	102	2.4	85	G3/4″	340	10607501000
			8	116	2.2	78
			10	145	2.0	71
			13	189	1.6	57
BG25A	18.5	25	7	102	3.1	109	G1″	400	11508501140
			8	116	2.9	102
			10	145	2.7	95
			13	189	2.2	78
BG30A	22	30	7	102	3.6	127	G1″	430	11508501140
			8	116	3.4	120
			10	145	3.2	113
			13	189	2.7	95
BG40A	30	40	7	102	5.2	184	G1″	460	11508501140
			8	116	5.0	177
			10	145	4.0	141
			13	189	3.1	109
BG50A	37	50	7	102	6.4	226	G1-1/2″	650	135010001340
			8	116	6.3	222
			10	145	5.4	191
			13	189	4.7	166
BG60A	45	60	7	102	7.3	258	G1-1/2″	700	135010001340
			8	116	7.2	254
			10	145	6.2	219
			13	189	5.7	201
BG75A	55	75	7	102	9.5	335	G2″	1050	170012001550
			8	116	9.4	332
			10	145	8.2	290
			13	189	6.7	237
BG100A	75	100	7	102	12.4	438	G2″	1100	170012001550
			8	116	12.2	431
			10	145	10.8	381
			13	189	9.1	321
BG125A	90	125	7	102	15.4	544	G2″	1500	210013001650
			8	116	15.0	530
			10	145	13.3	470
			13	189	11.4	403
BG150A	110	150	7	102	20.1	710	DN80	2650	250016501900
			8	116	19.9	703
			10	145	16.3	576
			13	189	14.5	512
BG180A	132	180	7	102	23.4	826	DN80	2800	250016501900
			8	116	23.0	812
			10	145	19.7	696
			13	189	16.0	565
BG220A	160	220	7	102	27.5	971	DN80	3950	300019001950
			8	116	27.0	954
			10	145	22.5	795
			13	189	21.0	742
BG250A	185	250	7	102	30.5	1077	DN80	4100	300019001950
			8	116	29.5	1042
			10	145	27.0	954
			13	189	22.5	795
BG300A	220	300	7	102	38.0	1342	DN100	5000	360022002200
			8	116	37.0	1307
			10	145	33.0	1165
			13	189	28.5	1006
BG340A	250	340	7	102	44.0	1554	DN100	5900	360022002200
			8	116	42.5	1501
			10	145	37.5	1324
			13	189	31.5	1112
BG420A	315	420	7	102	56.0	1978	DN125	6500	400023002300
			8	116	54.0	1907
			10	145	49.0	1730
			13	189	43.0	1519

Company Profile

Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.

Wallboge’ s primary businesses focus in following key areas:

Integrated screw air compressor for laser cutting
Permanent magnet variable frequency screw air compressor
Two-stage compression permanent magnet variable frequency screw air compressor
Low pressure two-stage compression permanent magnet variable frequency screw air compressor
Low pressure permanent magnet variable frequency screw air compressor
Water-lubricated oil-free screw air compressor
Fixed speed screw air compressor
Oil-free screw blower
Screw vacuum pump

At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 150 countries across the globe.

CHINAMFG continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.

Certifications

Exhibitions

After Sales Service

1. 24/7 after sales service in different languages.
2. Online instruction for installation and commissioning.
3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
4. CHINAMFG agents and after sales service available.

Our Advantages

1. Proven product quality.
2. Factory direct prices.
3. On-time delivery.
4. Prompt technical support in different languages before sales, in sales and after sales.
5. Small orders accepted to check quality first.
6. OEM & ODM service available.

FAQ

Q1: Are you a factory or a trading company?
A1: We are a factory. Please check our Company Profile.

Q2: What is the exact address of your factory?
A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China

Q3: What is your delivery time?
A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.

Q4: What kind of payment terms do you accept?
A4: We accept T/T, L/C at sight.

Q5: How long is the warranty of your air compressor?
A5: 2 years for the whole air compressor except consumable spare parts.

Q6: How long could your air compressor be used?
A6: Generally, more than 10 years.

Q7: What is your MOQ requirement?
A7: 1 unit.

Q8: Can you offer OEM & ODM service?
A8: Yes, with a professional design team, we can offer OEM & ODM service.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Engineers Available to Overseas Service.
Warranty:	2 Years
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China manufacturer 15kw 20HP OEM Fixed Speed Industrial Screw Air Compressor wholesaler
editor by CX 2024-04-11

China best 7bar 15kw 20HP Diesel Engine Portable Piston Mining Air Compressor Mobile for Jack Hammer supplier

Product Description

Complete variety and serialization

The 0.5~0.7Mpa series reciprocating piston air compressors designed with modern concepts have brought together new scientific and technological achievements in miniature air compression at home and abroad.

Technology concentration, excellent overall machine performance

The optimized design of the valve can effectively reduce the exhaust resistance and exhaust temperature, and increase the exhaust volume. Reasonably designed aluminum cylinder head and high heat dissipation fins realize rapid heat dissipation, effectively reduce exhaust temperature and reduce energy consumption. Adopt air intake or exhaust unloading device to effectively reduce energy consumption. Use the oil blower to blow the oil to form splash oil mist. Lubricate bushes and bearings for reliableoperation.

Close to the actual needs of users

A complete series of products, from small to large displacement, meet the demand of different types of pneumatic rock drills andother pneumatic machinery. The structure is diverse and suitable for different users. The goods are cheap and beautiful, and the investment cost is low.

Features:

1.Value plate and spring strip: made of special steel from Sweden and after special treatment; high efficient and reliable.

2.Piston ring: special design; integral casting; excellent flexibility; lowest lubricating oil consumption.

3.Cylinder: made of boron cast iron; wear resistant; special suitable for dust condition.

4.Cylinder cover: extrusion process adopted; streamlined external appearance; good heat emission performance.

5.Crankshaft: made from ductile cast iron; rare magnesium alloy after heat treatment and surface quenching;excellent performance.

6.Simple structure, light weight, easy to move.

Product Parameters

Model

W3108

W3118

W3128

W-1.8/5

W-2.85/5

W-3.0/5

W-3.5/5

Air delivery(m³/min)

2.0

3.0

3.5

1.8

2.85

3.0

3.5

Rated pressure(bar)

Rotation speed(r/min)

1150

1080

990

1180

1070

Cylinder Qty*Dia(mm)

3*108

3*118

3*128

3*100

3*115

3*120

3*125

Piston stroke(mm)

100

110

100

Driven method

Automatic clutch

Add: Building 5, No.5 Zhanghe Road, Hi-tech Industrial Development Zone, HangZhou
City, ZheJiang Province,China

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	1year
Warranty:	1year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Position:	Horizontal
Structure Type:	Open Type

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China best 7bar 15kw 20HP Diesel Engine Portable Piston Mining Air Compressor Mobile for Jack Hammer supplier
editor by CX 2024-03-27

China Custom 20HP Mini Scroll Oil-Free Silent Air Compressor Machine air compressor repair near me

Product Description

Stationary AC Oil Free Scroll Compressor Advantages:

1.Clean Air 100% Oil-Free
Oil-free type compressors can supply clean air.

2.Low noise & Low Vibration
Silent operation and low vibration assure comfortable and quiet work space.

3.Safe Backup Function
Even if 1 air end fails, another air end automatically replaces it by jump control. Unmanned operation at night has become easy.

4.Easy to Control
High quality microcomputer is mounted. Digital maintenance monitor displays operating conditions, warnings and cautions. Automatic power failures and reset function can be dealt with easily.

5.Compact and Smart Design
There are no extruding handles on the back of machine. Its simple design and reduced installation space required allow it to fit well in any office.

6.Designed especially for medical, pharmacy, laboratory, instrument, coating, chemical industry and food processing, etc.

Oil Free Scroll Air Compressor Description:

♦  Mute,Clean,Energy Saving,High Efficiency!
♦  Provide you with 100% oil-free compressed air!
♦  Oil-free scroll air compressor produces oil free,High quality and pure compressed air, which iswidely and Food , Medicine , Electronics , Printings , Chemicals , Precision Spraying and Golf Course etc.industries.

Technical Parameters Of Stationary AC Oil Free Scroll Compressor :

Model	Maximum working pressure		Capacity(FAD)				Installed motor power		No of air end	Outlet Diameter	Noise Level**	Dimensions (mm)			Weight
	Maximum working pressure		50 Hz		60 Hz		Installed motor power		No of air end	Outlet Diameter	Noise Level**	Dimensions (mm)			Weight
	bar(e)	psig	m³/min	cfm	m³/min	cfm	kW	hp	Units	inch	dB(A)	L	W	H	kg
DWW-2	7.5	109	0.25	9	0.24	8	2.2	3	1	Rc1/2″	65	840	780	1066	230
	8.5	123	0.24	9	0.23	8	2.2	3		Rc1/2″	65	840	780	1066	230
	10.5	152	0.22	8	0.21	7	2.2	3		Rc1/2″	65	840	780	1066	230
DWW-3	7.5	109	0.4	14	0.43	15	3.7	5	1	Rc1/2″	65	840	780	1066	230
	8.5	123	0.39	14	0.4	14	3.7	5		Rc1/2″	65	840	780	1066	230
	10.5	152	0.37	13	0.37	13	3.7	5		Rc1/2″	65	840	780	1066	230
DWW-5	7.5	109	0.51	18	0.47	16	5.5	7.5	2	Rc1″	68	930	1200	1230	360
	8.5	123	0.48	17	0.46	16	5.5	7.5		Rc1″	68	930	1200	1230	360
	10.5	152	0.44	16	0.42	15	5.5	7.5		Rc1″	68	930	1200	1230	360
DWW-7	7.5	109	0.8	28	0.86	30	7.5	10	2	Rc1″	68	930	1200	1230	360
	8.5	123	0.78	28	0.8	28	7.5	10		Rc1″	68	930	1200	1230	360
	10.5	152	0.74	26	0.74	26	7.5	10		Rc1″	68	930	1200	1230	360
DWW-11	7.5	109	1.2	42	1.26	44	11	15	3	Rc1″	70	1400	910	1320	500
	8.5	123	1.17	41	1.2	42	11	15		Rc1″	70	1400	910	1320	500
	10.5	152	1.11	39	1.1	39	11	15		Rc1″	70	1400	910	1320	500
DWW-15	7.5	109	1.6	56	1.73	61	15	20	4	Rc1″	70	1930	1270	1340	720
	8.5	123	1.56	55	1.61	57	15	20		Rc1″	70	1930	1270	1340	720
	10.5	152	1.47	52	1.47	52	15	20		Rc1″	70	1930	1270	1340	720
DWW-18	7.5	109	2	71	2.07	73	18	25	5	Rc1″	72	1930	1270	1340	860
	8.5	123	1.95	69	1.97	70	18	25		Rc1″	72	1930	1270	1340	860
	10.5	152	1.84	65	1.81	64	18	25		Rc1″	72	1930	1270	1340	860
DWW-22	7.5	109	2.4	85	2.53	89	22	30	6	Rc1″	72	1930	1270	1340	900
	8.5	123	2.34	83	2.41	85	22	30		Rc1″	72	1930	1270	1340	900
	10.5	152	2.21	78	2.21	78	22	30		Rc1″	72	1930	1270	1340	900
DWW-30	7.5	109	3.2	113	3.44	121	30	40	8	Rc1-1/4″	75	2030	1260	1720	1200
	8.5	123	3.12	110	3.28	116	30	40		Rc1-1/4″	75	2030	1260	1720	1200
	10.5	152	2.95	104	3.01	106	30	40		Rc1-1/4″	75	2030	1260	1720	1200
DWW-37	7.5	109	4	141	4.25	150	37	50	10	Rc1-1/2″	75	2030	1260	2100	1420
	8.5	123	3.89	138	4.05	143	37	50		Rc1-1/2″	75	2030	1260	2100	1420
	10.5	152	3.68	130	3.72	131	37	50		Rc1-1/2″	75	2030	1260	2100	1420
) FAD in accordance with ISO 1217:2009, Annex C: Ansolute intake pressure 1 bar (a), cooling and air intake temperature 20ºC *) Nosie level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance:±3 dB(A) Specifications are subject to change without prior notice

DENAIR Certificates:

DENAIR Factory:

At DENAIR, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us.

Why Choose DENAIR ?

1.Original Germany AERZEN/DENAIR air end,larger air delivery,lower noise.
2. Pass CE, ISO9001 Quality Certification
3. One of 3 biggest mobile air compressor manufacturer in China
4. Complete before-on-after sales service
5. Immediate reply or solution by email or call
6.Special oil gas separator with patents
7.High efficiency motor, up to 96%

DENAIR Overseas Sales Team

DENAIR Exhibitions:

DENAIR Global Customers:

Oil Free Scroll Air Compressor Packaging:

FAQ:

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang 201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

How does an air compressor work?

An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:

1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.

2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.

3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.

4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.

5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.

6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.

Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.

China Custom 20HP Mini Scroll Oil-Free Silent Air Compressor Machine air compressor repair near me
editor by CX 2024-02-04

China wholesaler 5HP 10HP 15HP 20HP 30HP 100% Pure Gas Scroll Air Compressor Totally Oil Free for Medical wholesaler

Product Description

Product features:
LG-12/2 screw air compressor is mainly used in material conveying, textile industry and other low-pressure gas sector industries, compared with the traditional piston type, pendulum type and other air compressors, with a long continuous operation time, no human care, stable operation, high reliability, low failure rate, low noise advantages, in actual use will bring users a very high economic and environmental benefits.

1, the overall design of air compressor:
LG-12/2 screw air compressor is composed of the bottom frame, which is reasonably arranged and installed: distribution box, motor, screw machine head, hot oil pump, oil cooler, oil and gas separator, protective silencer housing and other components (can be selected according to customers).
2. Control system:
The control system adopts HangZhou MAM880 screw air compressor microcomputer controller, and the main motor is started by star triangle. The whole control system is equipped with temperature sensor, pressure sensor, air intake valve, minimum pressure valve, safety valve, check valve, etc., to achieve the optimal accessories, reasonable configuration, automatic control, smooth operation, safe and reliable.
The main advantage of this type of screw air compressor is that in order to ensure the safe and reliable operation of the screw machine, the design selects the most reliable hot oil pump in China, so that the screw machine can ensure the normal circulation of the system cooling oil at any time!

Machine type	HYCW-12/2 Double Cylinder (cast iron model)
item	unit	Parameter value
Air displacement	m / min	12
Exhaust pressure	MPa	0.2
Shaft power	KW	38 or less
Specific power	KW / m . min -1	3.16
Inspiratory temperature	ºC	40 or less
Exhaust temperature	ºC	160 or less
Lubricating oil temperature	ºC	65
cleanliness	Mg	720
noise	Db ( A )	73
weight	KG	385
Rotational speed	r / min	1000
torque	N . M	362.9
Overall dimension	mm (Length * width * height)	951 * 930 * 775
Installation position	Seated mounting or with a diesel engine

Hot Products

Company Profile

The products cover 31 provinces of china, cities and autonomous regions, and export to more than 50 countries and regions.

Packaging & Shipping

FAQ

Q1.Dose your company has your own factory?
A:Yes,we have a factory ourself.which is in this business for 15 years in China.
Our factory is in the trailer base LiangShan,ZheJiang ,China.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	on-Line 7*24h
Warranty:	12 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China wholesaler 5HP 10HP 15HP 20HP 30HP 100% Pure Gas Scroll Air Compressor Totally Oil Free for Medical wholesaler
editor by CX 2024-01-03

China OEM Industrial Air Compressor 15kw Screw Air Compressor Machine Price Affordable Industrial 20HP Air Storage Tank Dryer Filter Complete Set Compresor De Aire air compressor oil

Product Description

HENNI INTERNATIONAL GROUP

Three selling points

Host Motor rotor Motor stator

The main parts of air compressor Generate electrical power used toproduce compresse dgas

About the air compressor

Oil and gas drum
Used to store gas The device is set simulta neously System pressurestabilization Definiteaction

Product Introduction

Permanent magnet /Constant frequency conversion air compressor	10A	Power	7.5KW
		Pressure	0.8MPA (can be customized)
		Length * width * height	850mm* 630mm* 920mm
		Exhaust volume	0.85m3/min
		Noise	68±2 Dda
		weight	145KG
Gas tank	Volume: 0.3m³	Design pressure	0.8 mpa
		Inside diameter of containe	500mm
		Container heigh	1590mm
		material	carbon steel
Freeze air dryer of DH series	10AC	Treated air volume	1.5m³
		Electric power	220/50HZ(can be customized)
		Length width heigh	680mm420mm 660mm
		weight	38KG
		Conditions of use	Inlet temperature≤80°C
		Dew point temperature	2-10°C
		Working pressure	1.0mpa
Filter	DH-015	Treated air volume	1.5m³
		Working pressure	1.3mpa
		Diameter	109mm
		Length	366mm

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Yes
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

1. Aircraft Systems:

2. Ground Support Equipment:

3. Component Testing:

4. Airborne Systems:

5. Environmental Control Systems:

6. Engine Testing:

7. Oxygen Systems:

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China OEM Industrial Air Compressor 15kw Screw Air Compressor Machine Price Affordable Industrial 20HP Air Storage Tank Dryer Filter Complete Set Compresor De Aire air compressor oil
editor by CX 2023-12-22

China Professional 20HP 30bar High Pressure AC Air Compressor air compressor repair near me

Product Description

Oilless High Pressure Rotary Portable Mini Industrial Used Movable Single Max Dental AC Oil Screw Part Parts Piston Free Air Pump Compressor

OIL-INJECTED FIXED SPEED COMPRESSOR

Model	Motor Power kW / hp	Free Air Delivery m3/min				Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
Model	Motor Power kW / hp	7barg	8barg	10barg	13barg	Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
CWD7	7.5 / 10	1.3	1.2	1.0	0.8	66	880700920	240
CWD11	11 / 15	1.7	1.6	1.4	1.2	68	10807501000	400
CWD15	15 / 20	2.5	2.3	2.1	1.9	68	10807501000	420
CWD18	18.5 / 25	3.2	3.0	2.7	2.4	68	12808501160	550
CWD22	22 / 30	3.8	3.6	3.2	2.8	68	12808501160	580
CWD30	30 / 40	5.3	5.0	4.5	4.0	68	12808501160	600
CWD37	37 / 50	6.8	6.2	5.6	5.0	68	140010001290	800
CWD45	45 / 60	8.0	7.3	7.0	5.9	72	140010001290	850
CWD55	55 / 75	10.1	9.5	8.7	7.8	72	180012301570	1660
CWD75	75 / 100	13.6	12.8	12.3	10.2	72	180012301570	1800
CWD90	90 / 125	16.2	15.5	14.0	12.5	72	180012301570	1900
CWD110	110 / 150	21.2	19.8	17.8	15.5	72	240014701840	2500
CWD132	132 / 180	24.5	23.2	20.5	17.8	75	240014701840	2700
CWD160	160 / 215	28.8	27.8	25.0	22.4	75	240014701840	3000
CWD185	185 / 250	32.5	31.2	28.0	25.8	75	315019802150	3500
CWD200	200 / 270	36.0	34.3	30.5	28.0	82	315019802150	4000
CWD250	250 / 350	43.0	41.5	38.2	34.9	82	315019802150	4500
CWD315	315 / 400	51.0	50.2	44.5	39.5	82	315019802150	6000
CWD355	355 / 450	64.0	61.0	56.5	49.0	84	315019802150	6500
CWD400	400 / 500	71.2	68.1	62.8	52.2	84	315019802150	7200

Model	Motor Power kW / hp	Free Air Delivery m3/min				Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
Model	Motor Power kW / hp	7barg	8barg	10barg	13barg	Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
CWD7 PM	7.5 / 10	1.3	1.2	1.0	0.8	66	760700920	200
CWD11 PM	11 / 15	1.7	1.6	1.4	1.2	68	9807501000	350
CWD15 PM	15 / 20	2.5	2.3	2.1	1.9	68	9807501000	360
CWD18 PM	18.5 / 25	3.2	3.0	2.7	2.4	68	11208501160	500
CWD22 PM	22 / 30	3.8	3.6	3.2	2.8	68	11208501160	520
CWD30 PM	30 / 40	5.3	5.0	4.5	4.0	68	11208501160	550
CWD37 PM	37 / 50	6.8	6.2	5.6	5.0	68	128010001290	750
CWD45 PM	45 / 60	8.0	7.3	7.0	5.9	72	128010001290	780
CWD55 PM	55 / 75	10.1	9.5	8.7	7.8	72	180012301570	1600
CWD75 PM	75 / 100	13.6	12.8	12.3	10.2	72	180012301570	1800
CWD90 PM	90 / 125	16.2	15.5	14.0	12.5	72	180012301570	1900
CWD110 PM	110 / 150	21.2	19.8	17.8	15.5	72	240014701840	2500
CWD132 PM	132 / 180	24.5	23.2	20.5	17.8	75	240014701840	2700
CWD160 PM	160 / 215	28.8	27.8	25.0	22.4	75	240014701840	3000
CWD185 PM	185 / 250	32.5	31.2	28.0	25.8	75	315019802150	3500
CWD200 PM	200 / 270	36.0	34.3	30.5	28.0	82	315019802150	4000
CWD250 PM	250 / 350	43.0	41.5	38.2	34.9	82	315019802150	4500
CWD315 PM	315 / 400	51.0	50.2	44.5	39.5	82	315019802150	6000
CWD355 PM	355 / 450	64.0	61.0	56.5	49.0	84	315019802150	6500
CWD400 PM	400 / 500	71.2	68.1	62.8	52.2	84	315019802150	7200

TWO-STAGE OIL-INJECTED COMPRESSOR

Model	Motor Power kW / hp	Free Air Delivery m3/min				Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
Model	Motor Power kW / hp	7barg	8barg	10barg	13barg	Noise Level dB(A)	Dimension *L W * H** mm	Weight Kg
CWD15-2S	15 / 20	3.0	2.9	2.4	2.2	68	14808501180	780
CWD18-2S	18.5 / 25	3.6	3.5	2.9	2.5	68	14808501180	800
CWD22-2S	22 / 30	4.2	4.1	3.5	3.2	68	14808501180	820
CWD30-2S	30 / 40	6.5	6.4	4.9	4.2	68	172011101480	1080
CWD37-2S	37 / 50	7.2	7.1	6.3	5.4	68	172011101480	1100
CWD45-2S	45 / 60	9.8	9.7	7.8	6.5	72	172011101480	1120
CWD55-2S	55 / 75	12.8	12.5	9.6	8.6	72	210013501720	2080
CWD75-2S	75 / 100	17.5	16.5	12.5	11.2	72	210013501720	2100
CWD90-2S	90 / 125	20.8	19.8	16.9	14.3	72	246017001900	3280
CWD110-2S	110 / 150	24.5	23.5	19.7	17.6	72	246017001900	3480
CWD132-2S	132 / 180	30.0	28.0	23.5	19.8	75	290018002571	3980
CWD160-2S	160 / 215	34.5	33.6	30.0	23.8	75	290018002571	4280
CWD185-2S	185 / 250	41.0	38.4	32.5	28.6	75	380019802150	5450
CWD200-2S	200 / 270	44.6	43.0	38.5	32.8	82	380019802150	5600
CWD220-2S	220 / 300	48.6	47.0	41.0	38.0	82	380019802150	6500
CWD250-2S	250 / 350	55.0	54.0	46.0	40.0	82	380019802150	6600

Unit measured according to ISO 1217, Annex C, Edition 4 (2009)

Reference conditions:
-Relative humidity 0%
-Absolute inlet pressure: 1 bar (a) (14.5 psi)
-Intake air temperature: 20°C, 68°F

Noise level measured according to ISO 2151:2004, operation at max. operating pressure and max. speed; tolerance: ±3 dB(A)
2S-Two Stage

FAQ

1. Q: Are you a factory or trading company?

A: We are a factory.
2. Q: What’re your payments ?

A: T/T,Western Union,L/C etc.
3. Q: What about the package ?

A: Standard export plywood case or carton.
4. Q: How long is the warranty ?

A: According to international standards, products in standard operation is 1 year,except quick-wear part.
5. Q: The use of products have?

A: The pump can suck the peanut, pickles, tomato slurry, red sausage, chocolate, hops and syrup etc.

The pump can suck the paint, pigment, glue and adhesive etc.

The pump can suck various glazed slurries of tile, porcelain, brick and chinaware etc.

The pump can suck various toxin and flammable or volatility liquid etc.

The pump can suck various strong acid, alkali and corrosive liquid etc.

After-sales Service:	Oversea Install Service
Warranty:	3
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China Professional 20HP 30bar High Pressure AC Air Compressor air compressor repair near me
editor by CX 2023-12-07

China Professional 15kw 20HP 30HP 22kw Variable Frequency Oil Free Screw Air Compressor mini air compressor

Product Description

15kw 20HP 30HP 22KW Variable Frequency Oil Free Screw Air Compressor

Motor
The motor with protection class IP54is used, the insulation class is F grade,and the bearing is made of SwedishSKF heavy bearing.

Air end
Adopting twin-screw main engine, largerotor and low speed design, new 5:6asymmetric rotor tooth profile, brandbearing, determines the excellent performance of the whole machine.

Intake valve
The red star intake valve can automaticallyadjust the gas volume according to the requirements of the system gas consumption,reducing operating costs.

MPV

Made of aluminum, it has outstanding antirust performance. With check function.The stable setting of the opening pressureensures that sufficient circulation pressureis established in the system to ensure lubrication of the machine body.

Cooling system
Feature:Large cooler system
Advantage:Axial flow Fan used forgood cooling effect
Benefit:Allow ambient temperature at 52″C.

Smart display screen
Feature:Intelligent control systemAdvantage:10 inch monitor to showall the date
Benefit:Simple operation and trouble free

Oil and gas separator
With the Apuda oil and gas separator,the rigorous oil and gas separationfilter can reduce the oil content of theexhaust gas in the compressor andthe fuel consumption of the unit.

The durable pipe system
The galvanized pipe is more durable, sturdy, longer, longer, and durable.

Specification

Model	Working Pressure		Air Delivery		Motor Power	Type of Driving	Type of Cooling	Dimension(mm)			Weight	Output pipe
	psig	bar	cfm	m3/min	kw/hp			L	W	H	(kg)	Diameter
GLDS-10A	100	7	38.8	1.1	7.5/10	Driect driven	Air Cooling	850	650	800	240	3/4″
	116	8	35.3	1
	145	10	30	0.85
	181	12.5	24.7	0.7
GLDS-15A	100	7	63.6	1.8	11/15			1050	700	1000	450	3/4″
	116	8	58.3	1.65
	145	10	53	1.5
	181	12.5	45.9	1.3
GLDS-20A	100	7	84.7	2.4	15/20			1050	700	1000	450	3/4″
	116	8	77.7	2.2
	145	10	74.2	2.1
	181	12.5	63.6	1.8
GLDS-25A	100	7	109.5	3.1	18.5/25			1250	850	1100	620	1″
	116	8	102.4	2.9
	145	10	95.3	2.7
	181	12.5	81.2	2.3
GLDS-30A	100	7	134.2	3.8	22/30			1250	850	1100	620	1″
	116	8	127.1	3.6
	145	10	113	3.2
	181	12.5	88.3	2.5
GLDS-40A	100	7	187.1	5.3	30/40			1350	850	1040	680	1-1/2″
	116	8	176.6	5
	145	10	151.8	4.3
	181	12.5	127.1	3.6
GLDS-50A	100	7	233	6.6	37/50			1550	1571	1330	850	1-1/2″
	116	8	218.9	6.2
	145	10	201.3	5.7
	181	12.5	162.4	4.6
GLDS-60A	100	7	282.5	8	45/60			1550	1571	1330	850	1-1/2″
	116	8	271.9	7.7
	145	10	243.6	6.9
	181	12.5	211.9	6
GLDS-75A	100	7	370.8	10.5	55/75			1950	1270	1620	1800	2″
	116	8	346	9.8
	145	10	307.2	8.7
	181	12.5	257.8	7.3
GLDS-100A	100	7	480.2	13.6	75/100			1950	1270	1620	1900	2″
	116	8	459	13
	145	10	399	11.3
	181	12.5	356.6	10.1
GLDS-125A	100	7	572	16.2	90/125			2450	1600	1740	1950	2″
	116	8	543.8	15.4
	145	10	466.1	13.2
	181	12.5	395.5	11.2
Motor Efficiency Class: Ultraefficient/IE3/IE2 as per your required
Motor Protection Class: IP23/IP54/IP55 or as per your required
Certification: CE/ISO9001
Voltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok

Equipment manufacturing industry: spray painting, spray washing machine, mechanical retreat mold, driving the assembly tools, drilling machine, hammer, lifting driving, combined tools, reamer, run run run, riveter screwdriver rotary drive, forging, metal forming press run operation, blasting, spraying, transmission, driving technology process.
Automobile manufacturing industry: spray cleaning parts, driving the assembly tool, fixture tools, lifting hoist crane, pneumatic control, forging hammer pressing workshop, casting workshop, metal workshop blast spray.
Beverage factory: running, bottle washing machine barrel turn, cHangZhou machine internal spraying, cleaning, food industrial used gas drying bottle, automatic operation, ash dust.
Cement manufacturing: Lime storage ventilation, cement slurry stirring and driving, cement bag clean sealing driving, raw material mixing, tipper operation, cleaning equipment, clinker cooling, conveying of cement and coal, cement kiln cleaning, vehicle and vessel handling, lifting and hoisting device, pneumatic control.
Chemical plant: ventilation and mixing, separation tower with gas, cleaning equipment, combustion gas, transportation, lifting liquid, spraying and cleaning pipe, pneumatic control, process gas, liquid transport.
Power plant: air cleaning pipeline, blowing smoke scale, cleaning of boiler and condenser pipe, jet cleaning, coal, sewage removal transmission, pneumatic control.
Hydropower plant maintenance: engine control, lock, drive controller, drive lubrication pump, driving lock, starting control, cleaning rubbish net.
The food industry (general application): mixing liquid, fermentation tank with gas (oxygen), cleaning equipment, with nozzle with nozzle cleaning container transport, food, raw materials, filtration dehydration.
Forging shop: oxygen skin, door, air curtain lifting hoist and hoist, driving the bending and straightening machine, driving clutch brake and a clamping device, the driving hammer, drive the fuel regulator.
Casting: hot metal car positioning, cleaning equipment, transporting sand, drive pneumatic tools, ramming machine, grinding machine, lifting hoist and elevator, pneumatic pick, tamping machine, steel than the brush, sandblasting, sieve sand, mud core.
Glass factory: blow bottle and glass, blow lamp and electronic tube, combustion gas, raw material, light transmission glass etching and drilling, conveying the glass, pneumatic control, vacuum hanging board.
Iron and steel plant: stirring the solution, oxygen with gas, HangZhou gas, converter with skip positioning, a sediment chamber drilling, unloading bags, open hearth CHINAMFG flue cleaning, driving clutch and brake, drive door, driving loading and transporting device, drive lubrication system, drive pneumatic tools, pneumatic pick, grinding wheel machine, lifting hoist and hoist, sandblasting, blast furnace, vacuum degassing furnace.
Wood, furniture processing: spray cleaning, gas lifting, bending, straightening, disseminated wood clamping clamp, pneumatic tools, carving tools, drilling machine, polishing machine, polishing machine, sand blasting, spray painting, spray device.
Sheet metal workshop: stirring the solution, transportation, jet cleaning, drive chip packaging press, driving plate chuck clutch and positioner, pneumatic tools, pneumatic pick, finishing hammer, drill, grinding wheel machine, crane and elevator, combination tools, riveting machine, sand blasting, spray, spray paint, lubricant container leakage detecting.
The mine ventilation gas, drilling: big hole, gas water removal, filtration fine crumbs, pneumatic hoist driven rock drill rig,,, blow hole, piling machine, drilling machine.
Oil refinery: combustion gas, emptying and cleaning oil, crane and elevator, drive control system, catalyst recycle, sandblasting, painting.
Papermaking factory: clean air equipment, crane and hoist, pool anti icing, roll feeding, pressing paper products, drive clutch, drive off paper machine, paper feeding through the machine, pneumatic control, pressure head box, demolition, removal of waste paper head box, vacuum drying.
Pharmaceutical manufacturers: mixing liquid, antibiotic fermentation with gas (oxygen), transmission of raw materials, raw materials, mixing and stirring driven, pneumatic control, air jet pulverization, spray drying, vacuum drying and vaporization of liquid, transmission.
Plant maintenance: jet cleaning, drive tools (hammer, concrete vibrator, drill, grinding wheel machine, crane, paving stone machine, riveter, oxide skin to wrench, winding machine, sand blasting, spray), metal, spray, spray system.
Textile factory: mixing liquid, gas lifting, moist, operation pressure accumulator, spray, spray system, transfusion.
Rubber factory: clean mold and mechanical devices, gas lifting, demoulding, mold, pneumatic control, spraying.

ZheJiang GLADES MACHINERY EQUIPMENT CO.,LTD.is located in HangZhou -logistics city , with the advantage of rapid transportation of goods. The company covers an area of more than 20 thousand square meters.with an annual output value of 6 million US dollars and fixed assets more than 10 million US dollars.

Glades’s primary businesses focus in following key areas:Oil-injected rotary screw compressors (Fixed speed and variable speed; normal and low pressure),Oil free screw air compressors (Scroll type, dry type, water-lubricated type),Energy Saving Screw Air Compressor(PM VSD screw air compressor,Two Stage Screw Air Compressor,Scroll screw air compressor),Portable screw air compressors ( electric motor powered),Air treatment equipment (Air dryers, air filters and air receiver tank) .At Glades, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. Glades has been exporting to more than 35 countries across the globe.
Upholding the core concept of “Reliable Carrying Trust”, ZheJiang Glades strives to provide the most reliable products and services through continuous innovation, so that customers can continue to obtain the maximum value for their returns.
Advantages:
Large displacement: Displacement 10% higher than ordinary piston compressor.
Energy-saving: Compared with piston air compressor, this series of models for the new national standard 2 energy efficiency products, excellent energy saving.
Easy to operate: 24 hours unattended all day work, free load automatically start, full load automatically shut down.
Strong stability:Under long time working, displacement and pressure stable, no crash phenomenon, low failure rate.

FAQ:
Q1:Where is your factory located?
A:Our factory is located in HangZhou city which nears HangZhou port about 2 hours.

Q2:How many air compressors do you produce everyday?
A: We can produce 100 pieces everyday.

Q3: Can you use our brand?
A: Yes, OEM/ODM is available.

Q4:How about your after-sales service?
  a.Provide customers with installation and commissioning online instructions.
  b.Well-trained engineers available to overseas service.
  c.CHINAMFG agents and after service available.

Q5:What’s your delivery time?
Generally 15 to 20 days, if urgently order, pls contact our sales in advance.

Q4: Why should I choose you?
1. 24/7 after sales service support in different languages;
2. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center;
3. Technical training for customers in Glades air compressor factory or working site;
4. Plenty of original spare parts with proven quality are all available.

5.All kinds of technical documents in different languages.

After-sales Service:	24 Hours Online Service
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

Air Pressure:

Air Volume:

Duty Cycle:

Size and Portability:

air compressor

How does an air compressor work?

Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

China Professional 15kw 20HP 30HP 22kw Variable Frequency Oil Free Screw Air Compressor mini air compressor
editor by CX 2023-12-04

China Hot selling 10 HP 20HP 30HP 50HP Best Price 30% Energy Saving Pm VSD Screw Air Compressor Direct Driven Twin CHINAMFG mini air compressor

Product Description

1. High-efficiency permanent magnet motor, more energy-saving than ordinary three-phase asynchronous motor

2. The main machine adopts a new generation of profiled main machine, one-piece shaft structure, compact structure, stable operation and high energy efficiency
3. Intelligent control, reasonable design, high reliability of the whole machine, simple and convenient daily maintenance
4. PID fuzzy control makes the pressure control more accurate and the equipment runs more smoothly

Product Parameters

Technical Parameter

Model	Air delivery (m3/min)	Power kW	Noise (DB)	Outlet diameter	Dimension (mm)			Weight (kg)
	0.8Mpa				Length	Width	Height
SEM-10A	1.01	7.5	65±2	RP3/4	862	662	832	125
SEM-20A	2.30	15	70±2	G3/4	1110	750	1571	236
SEM-30A	3.40	22	70±2	G1	1210	800	1160	301
SEM-50A	6.10	37	70±2	G1 1/2	1250	1571	1250	460

Detailed description

1.Rotor
Rotors are asymmetric in profile, backed up by ball bearings and roller bearings. Operates at a low speed, thereby low in abrasion and maintenance expenses, air end is long service life.

2.Control panel
Intelligent microcomputer-based control technology can monitor and control in all aspects the complete machine following your instructions, remote control realizes unattended operation.

3.Oil filter
Rotary filters are applied to completely remove the impurities in the lubricating oil, easy to replace and free of oil impregnate.

4.Air filter
Original imported filter material,high efficiency 3 levels air separator, keep internal cleanliness of the system effectively.

5.Cooler
The cooler is located separately from the internal isolation of the chassis,so that the cooling fans would suck air with normal temperature from outside.Compared to cooling by using the air of 45~65°Cinside the chassis,the cooling fans could save over 30% energy when the temperature of the air outlet decreases 3~8°C.

6.Excellent quality of motors
Professional customized high efficiency permanent magnet motor,Compared to normal motors, Permanent magnet motor more excellent energy saving.protection grade:IP65

7.The air end of compressor is of high efficiency and long life
Excellent CHINAMFG bearings are adopted for compressor air end to better improve their use efficiency,reduce abrasion.and to realize long term operation with no faults,low noise and long life.

Application industry

Air compressors are widely used in industries to meet customers’ various gas needs,such as Industrial equipment,pipelines, printing service, electric power, metallurgy, oil&gas, power plants, shipbuilding, plastics, painting, textile, blow molding, steel industry, chemical industry, shipyard, machanical etc.

Company Profile

Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineersteams ‘ .We focus on the research & develop,manufacture and energy-saving solutions of screw air compressor to create value for customers and society.In 2018 our total sales volume approached 15 million US dollars.By over 23 years enhanced experiences of designing,producing and marketing,today our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.

Dehaha’s primary businesses focus in following key areas:
Oil-injected rotary screw compressors
Portable screw air compressors
Oil free air compressors
High pressure air compressors
Air treatment equipment

At Dehaha,we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries.All of our products are designed for reliable performance,easy maintenance,and maximum energy efficiency.We have sales representatives who can speak English,Spanish,French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.

Dehaha continuously innovates product development and management to meet customers’ demand.The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly to reach the business principle”Energy Saving First, Mutual Value Shared”. CHINAMFG mission is to be a world-renowned high-end brand,with sustainable development,constantly improving its own value and sharing it with our customers and staff.Committed to offer our customers a silent and energy-saving manufactured products.
Certificates

Our exhibition

Our service

1. 24h/7 after sales support in different languages
2. Follow up the in products in 2 months interval by email or call
3.Guidance of installation and commissioning on site can be provided by factory-trained technicians
4. Technical training for customers in CHINAMFG air compressor factory or working site.
5. plenty of drginal spare parts with proven quality are all available from our stocks in Jianhgsu .
6. All kinds of technical documents in different languges.

FAQ

1.Why customer choose us?

DHH CHINAMFG ZheJiang CO.,LTD.with 23 years old history,we are specialized in Rotary Screw Air Compressor.Germany Standard and 13 years exporting experience help us won more than 30 loyal foreign agents.We warmly welcome your small trial order for quality or market test.

2.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in HangZhou,China,with professional design team.Both OEM & ODM service can be accepted.

3.Where is your factory located? How can I visit there?
Our factory is located in HangZhou City, ZheJiang Province, China. We can pick up you from ZheJiang , it’s about 1 hour from ZheJiang Xihu (West Lake) Dis. Airport to our factory. Warmly welcome to visit us!

4.What’s your delivery time?
380V 50HZ we can delivery the goods within 14 days. Other electricity or other color we will delivery within 22 days,if urgently order,pls contact our sales in advance.

5.How long is your air compressor warranty?
One year for the whole machine and 2 years for screw air end, except consumable spare parts and we can provide some spare parts of the machines.

6.How does your factory do regarding quality control?
Quality is everything. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2015 authentication and CE certificate.

7.How long could your air compressor be used?
Generally, more than 10 years.

8. What’s payment term?
T/T,L/C,D/P,Western Union,Paypal,Credit Card,and etc.Also we could accept USD, RMB, Euro and other currency.

9.How about your customer service?
24 hours on-line service available.48 hours problem solved promise.

10.How about your after-sales service?
(1) Provide customers with installation and commissioning online instructions.
(2) Well-trained engineers available to overseas service.
(3) CHINAMFG agents and after service available.

After-sales Service:	Online Support
Warranty:	24montrhs
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Air Pressure Regulation:

Air Volume and Flow:

Tool Actuation:

Versatility:

Portability:

air compressor

How does an air compressor work?

Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

China Hot selling 10 HP 20HP 30HP 50HP Best Price 30% Energy Saving Pm VSD Screw Air Compressor Direct Driven Twin CHINAMFG mini air compressor
editor by CX 2023-10-31

China Custom 20HP 15kw Screw Air Compressor for Spray Painting with high quality

Product Description

PM VSD TYPE SCREW AIR COMPRESSOR

* High efficiency power-saving

* Permanent magnet motor

* Frequency Inverter

Model	Power KW	Power HP	Air flow L/min	Pressure bar	Drive Mode
SA-10E	7.5	10	1.2/1.1/0.95/0.8	7/8/10/12	Direct
SA-15E	11	15	1.65/1.5/1.3/1.1	7/8/10/12	Direct
SA-20E	15	20	2.5/2.3/2.1/1.72	7/8/10/12	Direct
SA-25E	18.5	25	3.2/3.0/2.7/2.4	7/8/10/12	Direct
SA-30E	22	30	3.8/3.6/3.2/2.7	7/8/10/12	Direct
SA-40E	30	40	5.3/5.0/4.5/4.0	7/8/10/12	Direct
SA-50E	37	50	6.8/6.2/5.6/5.0	7/8/10/12	Direct
SA-75V	55	75	10/9.6/8.5/7.6	7/8/10/12	Direct
SA-100V	75	100	13.4/12.6/11.2/10.0	7/8/10/12	Direct
SA-150V	110	150	21/19.8/17.4/14.8	7/8/10/12	Direct
SA-175V	132	175	24.5/23.2/20.5/17.4	7/8/10/12	Direct

FAQ:

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: How about the warranty terms of your machine?
A2: One year for the whole machine and 2 years for screw air end, except consumble spare parts.

Q3: Could you provide some spare parts of the machines?
A3: Yes, we can offer.

Q4: What about product package?
A4: We will pack the products strictly with standard wooden carton.

Q5: Can you customized the voltage of products?
A5: Yes, the voltage can be customized according to your requirement. Like 380V/60HZ, 415V/50HZ, 220V/60HZ and so on.

Q6: Can you provide samples?
A6: Yes, we cam provide samples.

Q7: How long will you take to arrange production?
A7: Regular model within 7-15 days. Customized model within 25-30 days.

Q8: How about your customer service?
A8: 24 hours on-line service available. 48 hours problem solved promise.

Q9: Which payment term can you accept?
A9: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

After-sales Service:	Online Service
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Samples:	US$ 1500/unit 1 unit(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What is the impact of humidity on compressed air quality?

1. Corrosion:

2. Contaminant Carryover:

3. Decreased Efficiency of Pneumatic Systems:

4. Product Contamination:

5. Increased Maintenance Requirements:

6. Adverse Effects on Instrumentation:

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Air Pressure Regulation:

Air Volume and Flow:

Tool Actuation:

Versatility:

Portability:

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

China Custom 20HP 15kw Screw Air Compressor for Spray Painting with high quality
editor by CX 2023-10-27

Product Description

What is the role of air compressors in power generation?

How are air compressors utilized in pneumatic tools?

What are the different types of air compressors?

Product Description

How are air compressors utilized in the aerospace industry?

Can air compressors be integrated into automated systems?

How do oil-lubricated and oil-free air compressors differ?

Product Description

DENAIR Certificates: DENAIR Factory:

DENAIR Overseas Sales Team DENAIR Exhibitions: DENAIR Global Customers: Oil Free Scroll Air Compressor Packaging:

How are air compressors used in the food and beverage industry?

How does the horsepower of an air compressor affect its capabilities?

How does an air compressor work?

Product Description

What is the impact of humidity on compressed air quality?

How do you maintain proper air quality in compressed air systems?

How is air pressure measured in air compressors?

Product Description

How are air compressors utilized in the aerospace industry?

Are there differences between single-stage and two-stage air compressors?

What is the difference between a piston and rotary screw compressor?

Product Description

Oilless High Pressure Rotary Portable Mini Industrial Used Movable Single Max Dental AC Oil Screw Part Parts Piston Free Air Pump Compressor

FAQ

What role do air dryers play in compressed air systems?

What is the energy efficiency of modern air compressors?

How do you choose the right size of air compressor for your needs?

Product Description

What are the advantages of using an air compressor in construction?

How does the horsepower of an air compressor affect its capabilities?

How does an air compressor work?

Product Description

How are air compressors utilized in pharmaceutical manufacturing?

How are air compressors utilized in pneumatic tools?

How does an air compressor work?

Product Description

PM VSD TYPE SCREW AIR COMPRESSOR

What is the impact of humidity on compressed air quality?

How are air compressors utilized in pneumatic tools?

How do you choose the right size of air compressor for your needs?

DENAIR Certificates:

DENAIR Factory:

DENAIR Overseas Sales Team

DENAIR Exhibitions:

DENAIR Global Customers:

Oil Free Scroll Air Compressor Packaging: